4061402700 Top Puller Assembly for Feed-Off-Arm Machines

4061402700 Top Puller Complete Assembly

The 4061402700 Top Puller Complete Assembly provides auxiliary fabric feeding for compatible feed-of-the-arm industrial sewing machines. It mounts on the upper arm drive mechanism and helps maintain steady material movement during demanding industrial sewing operations.

This complete assembly uses Part #4061402700 / 406-1402700 and includes the top steel tooth puller roller, mounting bracket, drive gear shaft, tension springs and mounting hardware. The assembly gives you the main components required to replace a worn or damaged upper puller system.

The top puller works together with the machine’s lower feeding mechanism to control fabric movement through the sewing area. This additional feeding action can help reduce fabric shifting and improve control when sewing long seams, tubular sections and multiple fabric layers.

What You Get With This Top Puller Assembly

Each pack contains 1 complete top puller assembly set, शामिल:

• Top steel tooth puller roller
• Mounting bracket
• Drive gear shaft
• तनाव स्प्रिंग्स
• माउंटिंग हार्डवेयर

The complete set simplifies replacement because you receive the primary components together instead of purchasing individual parts separately.

प्रमुख विशेषताऐं

Part Number 4061402700

The assembly carries 4061402700 / 406-1402700 as the specified part number. Match this number with your machine parts list and existing component before ordering.

Steel Toothed Puller Roller

The toothed roller grips the fabric while the machine feeds material through the sewing area. Its serrated surface provides additional traction for applications that involve thick or multiple fabric layers.

Auxiliary Top Feeding

The top puller adds feeding action above the sewing area and works with the machine’s existing feeding mechanism. This setup can help maintain more consistent fabric movement during continuous sewing.

Adjustable Spring Pressure

The integrated tension springs allow you to adjust the roller pressure according to the fabric and sewing application. Proper pressure helps the roller maintain contact without applying unnecessary force to the material.

संपूर्ण प्रतिस्थापन असेंबली

The product combines the roller, drive components, bracket, springs and mounting hardware in one set. This can make maintenance and replacement more convenient for compatible machines.

मशीन अनुकूलता

The 4061402700 Top Puller Complete Assembly is intended for compatible feed-of-the-arm industrial chainstitch and lap-seaming machines.

The supplied compatibility information includes:

*Always confirm the exact model, version and existing assembly before purchasing.

The part number 4061402700 also appears in parts documentation for the Jack 9270/9280 family as an upper puller assembly.

Please verify the shape, mounting points and measurements of your existing assembly before purchasing.

What Does a Top Puller Do?

A top puller provides additional fabric feeding from the upper side of the sewing area. It works alongside the lower feed system to help move fabric through the machine.

This type of feeding system can prove useful when the sewing application involves:

• कपड़े की कई परतें
• Long continuous seams
• Tubular garment sections
• Lap seams
• Heavy-duty fabrics
• Workwear construction
• Denim garment production

The upper roller maintains contact with the material while the machine performs the sewing operation.

उपयुक्त कपड़े के प्रकार

The 4061402700 top puller assembly suits demanding garment and textile applications involving heavier or multi-layer materials.

डेनिम

The toothed roller provides additional grip when sewing denim layers, including jeans and denim jackets.

Heavy Cotton

The top puller can help control heavier cotton materials during continuous industrial sewing.

कैनवास

The assembly can support controlled feeding when machines sew suitable canvas applications.

Workwear Fabrics

Workwear garments often combine several fabric layers around seams and reinforced areas. The auxiliary top feeding system can help maintain material movement through these sections.

Technical Apparel

The assembly can support applications that require controlled feeding of suitable technical or heavy-duty apparel fabrics.

आवेदन

This top puller assembly can support several industrial garment-sewing applications, including:

• Denim garment production
• Jeans manufacturing
• Denim jacket sewing
• Workwear production
• Coverall manufacturing
• Lap-seam sewing
• Tubular garment sewing
• Multi-layer seam construction
• Heavy fabric sewing
• Industrial chainstitch operations

Why Use a Complete Top Puller Assembly?

Replacing individual components can require you to identify several separate parts and check their compatibility. A complete assembly brings the primary puller components together in one package.

The complete set can help simplify maintenance when the existing upper puller has worn, damaged or missing components. It also gives you the specified roller, drive components, springs and mounting hardware as one replacement set.

How To Install the 4061402700 Top Puller Assembly

1. Switch off the machine: Turn off the sewing machine and disconnect the power before beginning installation.
2. Remove the old assembly: Remove the existing top puller according to the machine manufacturer’s service procedure.
3. Inspect the mounting area: Check the upper drive mechanism and mounting points for damage or excessive wear.
4. Position the assembly: Place the 4061402700 top puller assembly in the correct mounting position.
5. Secure the bracket: Tighten the mounting hardware and make sure the bracket sits correctly.
6. Check the drive shaft: Rotate the mechanism manually and confirm smooth movement.
7. Adjust spring pressure: Set the puller pressure according to the fabric and sewing requirement.
8. Check roller contact: Make sure the roller contacts the material correctly without excessive pressure.
9. Test at low speed: Run the machine slowly and observe the upper and lower feeding action.
10. Start normal sewing: Begin regular operation only after the feeding system works smoothly.

If you are unfamiliar with feed-of-the-arm machine timing or mechanical adjustments, have a qualified sewing-machine technician install and adjust the assembly.

रखरखाव संबंधी सुझाव

Regular inspection can help keep the top puller system working smoothly.

• Keep the roller and surrounding mechanism clean.
• Remove accumulated lint and fabric debris.
• Check the roller teeth for excessive wear.
• Inspect springs for damage or loss of tension.
• Check mounting screws and hardware periodically.
• Look for unusual movement or noise from the drive mechanism.
• Check upper and lower feeding synchronization during servicing.
• Replace worn components before they affect fabric feeding.

Important Compatibility Information

The 4061402700 Top Puller Complete Assembly fits specific feed-of-the-arm machine configurations. Machine versions can use different mechanical arrangements, so the product should not be selected by brand name alone.

Before ordering, compare:

• भाग संख्या
• मशीन मॉडल
• Existing puller shape
• माउंटिंग पॉइंट्स
• Drive shaft arrangement
• Roller position
• Existing assembly measurements

Please verify the shape and measurements of your existing part before purchasing if you are unsure about compatibility.

अक्सर पूछे जाने वाले सवाल

What is the 4061402700 Top Puller Assembly?

The 4061402700 Top Puller Assembly is an auxiliary upper feeding component for compatible feed-of-the-arm industrial sewing machines. It uses a toothed roller and drive mechanism to help move fabric through the sewing area.

What machines use 4061402700?

The supplied specifications list Brother DA-9270 and DA-9280 series, Juki MS-1190, MS-1260 and MS-3580, Union Special 35800 series, and selected Kansai Special, Singer and Kingtex feed-of-the-arm machines. Always check your exact machine configuration before ordering.

Is 4061402700 suitable for denim sewing?

हाँ।. The supplied product specifications identify denim and heavy-duty apparel as suitable applications. The toothed roller provides additional fabric grip during multi-layer sewing.

Does this product include the complete assembly?

हाँ।. The pack contains one complete top puller assembly with the top steel tooth roller, mounting bracket, drive gear shaft, tension springs and mounting hardware.

What does the top puller do on a sewing machine?

The top puller provides auxiliary feeding from above the sewing area. It works with the machine’s lower feeding system to help maintain controlled material movement during industrial sewing.

Can I install this assembly myself?

You can install it if you have experience servicing feed-of-the-arm industrial sewing machines. Correct mounting and mechanical timing can affect feeding performance, so a qualified technician should handle installation when you are unsure about the machine’s adjustment procedure.

Does the top puller work with heavy fabrics?

हाँ।. The product specifications identify heavy denim and technical apparel applications. The toothed roller can provide additional grip when the machine handles suitable heavy or multi-layer fabrics.

मैं संगतता की पुष्टि कैसे करूं?

Compare your machine model and existing assembly with 4061402700 / 406-1402700. Check the roller shape, mounting points, drive arrangement and measurements before purchasing.

Buy 4061402700 Top Puller Complete Assembly

Choose the 4061402700 Top Puller Complete Assembly when you need a replacement upper feeding assembly for a compatible feed-of-the-arm industrial sewing machine. The complete set combines the top puller roller, drive components, springs and mounting hardware to support controlled fabric feeding during demanding garment-sewing applications.

For accurate fitment, always match the part number and machine configuration with your existing component before placing an order.