S40375001 / S40376001 / S40377001 आर्म मशीन के फीड के लिए लूपर
Short Description
S40375001 / S40376001 / S40377001 looper for Brother DA-9270/9280 and Jack JK-9270D-13 feed-off-the-arm machines. COD available.
मूल्य सीमा: ₹180.00 से ₹500.00 तक
हमने आपको इस उत्पाद की प्रतीक्षा सूची में जोड़ दिया है और उत्पाद उपलब्ध होने पर हम आपको एक ईमेल भेजेंगे।.
प्रतीक्षा सूची से बाहर निकलेंयह उत्पाद वर्तमान में बिक चुका है।.
चिंता मत कीजिए! अपना ईमेल पता दर्ज कीजिए, और स्टॉक में वापस आते ही हम आपको सूचित कर देंगे।.
The S40375001 / S40376001 / S40377001 Looper forms the lower chain stitch on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing skipped stitches or thread cutting caused by a worn or damaged looper tip.
Part Details
| विवरण | Information |
|---|---|
| Part No. | S40375001 / S40376001 / S40377001 |
| Part Name | Looper |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Stitches skip even with a fresh needle.
- The looper tip is burred and cuts the thread.
- The looper was bent by a needle strike.
How to Fit It
- First, switch off the machine and remove the throat plate.
- Next, loosen the screw and remove the old looper.
- Then fit the new looper at the same height and tighten.
- Finally, turn the hand wheel to check the looper passes the needles cleanly.
पूछे जाने वाले प्रश्न
Which looper number do I need?
Three part numbers are listed: S40375001, S40376001 and S40377001. Match yours against the old looper before ordering.
Which machines does it fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The S40375001 / S40376001 / S40377001 Looper forms the lower chain stitch on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing skipped stitches or thread cutting caused by a worn or damaged looper tip.
Part Details
| विवरण | Information |
|---|---|
| Part No. | S40375001 / S40376001 / S40377001 |
| Part Name | Looper |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Stitches skip even with a fresh needle.
- The looper tip is burred and cuts the thread.
- The looper was bent by a needle strike.
How to Fit It
- First, switch off the machine and remove the throat plate.
- Next, loosen the screw and remove the old looper.
- Then fit the new looper at the same height and tighten.
- Finally, turn the hand wheel to check the looper passes the needles cleanly.
पूछे जाने वाले प्रश्न
Which looper number do I need?
Three part numbers are listed: S40375001, S40376001 and S40377001. Match yours against the old looper before ordering.
Which machines does it fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
