81716001 सुई क्लैंप
Short Description
81716001 needle clamp for Brother DA-9270/9280 and Jack JK-9270D-13 feed-off-the-arm machines. COD available.
₹450.00
The 81716001 Needle Clamp holds the needle in the needle bar on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing needles that slip, sit crooked or break repeatedly.
Part Details
| विवरण | Information |
|---|---|
| Part No. | 81716001 |
| Part Name | सुई क्लैंप |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Needles loosen or slip after tightening.
- The clamp thread is stripped.
- Needles hit the plate because they sit crooked.
How to Fit It
- First, switch off the machine and remove the needle.
- Next, unscrew the old clamp from the needle bar.
- Then fit the new clamp and insert the needle fully.
- Finally, tighten the screw and turn the hand wheel to check clearance.
पूछे जाने वाले प्रश्न
Is 81716001 the same as the 1/4 937 needle clamp?
No. The 1/4 937 needle clamp is for the 937 three-needle gauge. Match 81716001 to your machine’s parts list.
Which machines does it fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The 81716001 Needle Clamp holds the needle in the needle bar on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing needles that slip, sit crooked or break repeatedly.
Part Details
| विवरण | Information |
|---|---|
| Part No. | 81716001 |
| Part Name | सुई क्लैंप |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Needles loosen or slip after tightening.
- The clamp thread is stripped.
- Needles hit the plate because they sit crooked.
How to Fit It
- First, switch off the machine and remove the needle.
- Next, unscrew the old clamp from the needle bar.
- Then fit the new clamp and insert the needle fully.
- Finally, tighten the screw and turn the hand wheel to check clearance.
पूछे जाने वाले प्रश्न
Is 81716001 the same as the 1/4 937 needle clamp?
No. The 1/4 937 needle clamp is for the 937 three-needle gauge. Match 81716001 to your machine’s parts list.
Which machines does it fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
