S40798050 आर्म मशीन के फीड के लिए प्रेसर बार क्लैंप
Short Description
S40798050 presser bar clamp for Brother DA-9270/9280 and Jack JK-9270D-13 feed-off-the-arm machines. COD available.
मूल कीमत थी: ₹400.00.₹270.00वर्तमान कीमत है: ₹270.00.
The S40798050 Presser Bar Clamp locks the presser bar in place on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing a presser foot that slips, drifts or loses pressure on the fabric.
Part Details
| विवरण | Information |
|---|---|
| Part No. | S40798050 |
| Part Name | Presser bar clamp |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- The presser foot rotates or shifts out of line.
- The clamp screw strips or will not hold the bar.
- Fabric feeds unevenly because foot pressure changes.
How to Fit It
- First, switch off the machine and raise the presser bar.
- Next, loosen and remove the old clamp.
- Then fit the new clamp on the bar at the same height and tighten.
- Finally, lower the foot and check it sits flat over the needle plate.
पूछे जाने वाले प्रश्न
Which machines does S40798050 fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Should I replace the presser bar too?
Only if the bar itself is bent or scored. The matching presser bar S06259001 is sold separately.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The S40798050 Presser Bar Clamp locks the presser bar in place on Brother DA-9270 / DA-9280 and Jack JK-9270D-13 feed-off-the-arm machines. Best for workshops fixing a presser foot that slips, drifts or loses pressure on the fabric.
Part Details
| विवरण | Information |
|---|---|
| Part No. | S40798050 |
| Part Name | Presser bar clamp |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- The presser foot rotates or shifts out of line.
- The clamp screw strips or will not hold the bar.
- Fabric feeds unevenly because foot pressure changes.
How to Fit It
- First, switch off the machine and raise the presser bar.
- Next, loosen and remove the old clamp.
- Then fit the new clamp on the bar at the same height and tighten.
- Finally, lower the foot and check it sits flat over the needle plate.
पूछे जाने वाले प्रश्न
Which machines does S40798050 fit?
It is listed for the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13.
Should I replace the presser bar too?
Only if the bar itself is bent or scored. The matching presser bar S06259001 is sold separately.
Is COD available?
Yes. StitchPartner delivers pan-India with COD available.
