उत्पाद वर्णन
69-120 Needle Bar Guide Plate for Kansai Special Multi-Needle Sewing Machines
के लिए सर्वश्रेष्ठ
The 69-120 Needle Bar Guide Plate is a precision replacement guide component for compatible multi-needle chainstitch, elastic-attaching and smocking machines. Its heat-treated steel construction and polished guide channel support smooth needle-bar travel and stable alignment during repeated industrial sewing cycles.
प्रमुख विशेषताऐं
- Precision guide plate for multi-needle needle-bar mechanisms.
- Part number 69-120 / 69120 for straightforward spare-part identification.
- Heat-treated steel construction for repeated industrial operation.
- Ground and mirror-polished guide channel for smooth movement.
- Helps control side-play and vibration in the needle-bar mechanism.
- Accurate mounting holes and slots simplify replacement and positioning.
- Supports consistent needle positioning across multi-needle configurations.
- Designed as a direct replacement for compatible machine configurations.
- Pack of 1 piece.
उपयोग के मामले
This guide plate is suitable for:
- Elastic waistband inserting
- Waistband and waistline operations
- Track-pants manufacturing
- Underwear production
- Smocking
- Multi-line decorative stitching
- Elastic garment production
- Industrial multi-needle sewing-machine maintenance
- Garment-factory machine rebuilding
फ़ायदे
Supports Stable Needle-Bar Travel
The guide plate provides a controlled guiding surface for the needle-bar mechanism, helping maintain smooth movement during repeated sewing cycles.
Helps Maintain Multi-Needle Alignment
Multi-needle machines depend on consistent relative needle positioning. A correctly fitted guide plate helps keep the needle-bar mechanism stable during operation.
Heat-Treated Construction
The heat-treated steel construction provides a wear-resistant working component for machines operating under frequent mechanical movement.
Smooth Guide Channel
The polished guide channel creates a smooth contact surface, helping reduce unnecessary friction between the guide and associated moving components.
Accurate Replacement Positioning
The machined mounting holes and adjustment slots allow the replacement component to be positioned correctly within the original guide mechanism.
मशीन अनुकूलता
Primary compatibility: Kansai Special multi-needle elastic-attaching, chainstitch and smocking machines.
Listed models: DFB-1404, DFB-1408, DFB-1412, DFB-4408, DFB-4412 and DVK-1702, including compatible 1400/4400-series configurations.
Additional stated compatibility: Siruba VC008, Jack, Highlead and other compatible Kansai-style multi-needle chainstitch machines.
Part Number: 69-120 / 69120
For machines outside the primary Kansai Special application, verify the existing part number and physical dimensions before purchasing.
विशेष विवरण
| विनिर्देश | विवरण |
|---|---|
| उत्पाद का प्रकार | Needle Bar Guide Plate |
| Part Number | 69-120 / 69120 |
| मशीन का प्रकार | Multi-Needle Chainstitch |
| आवेदन | Elastic Attaching / Smocking |
| Primary Machine Series | Kansai Special 1400 / 4400 |
| निर्माण | Heat-Treated Steel Alloy |
| Guide Surface | Ground & Polished |
| समारोह | Needle-Bar Alignment & Guidance |
| Fabric Application | Light to Heavy Elastic Materials |
| पैक मात्रा | 1 टुकड़ा |
का उपयोग कैसे करें
First, switch off the sewing machine and disconnect the power supply before beginning mechanical maintenance.
Next, access the needle-bar guide mechanism and inspect the existing guide plate, mounting points and mating surfaces for wear or damage.
Then, remove the existing guide plate and install the replacement in the original position, ensuring the mounting holes and guide channel are correctly aligned with the machine mechanism.
Finally, manually move the needle-bar mechanism through its complete travel to confirm smooth movement and correct clearance before running the machine slowly with test material.
पूछे जाने वाले प्रश्न
What is a needle bar guide plate used for?
A needle bar guide plate provides a guiding surface that controls the movement of the needle-bar mechanism. On multi-needle machines, stable guidance helps maintain the relative position of multiple needles during repeated sewing cycles.
Is the 69-120 guide plate compatible with Kansai Special machines?
Yes. The supplied application identifies 69-120 / 69120 for Kansai Special DFB-1404, DFB-1408, DFB-1412, DFB-4408, DFB-4412 and DVK-1702 machines, along with compatible 1400/4400-series configurations.
Can a worn guide plate cause needle-bar movement?
Yes. Wear in the guide surface can increase clearance between mating components, allowing unwanted movement or side-play. Inspecting the guide plate is therefore important when a multi-needle machine develops excessive needle-bar movement.
What is the benefit of the polished guide channel?
The polished channel provides a smoother contact surface for the moving mechanism. This helps reduce friction at the guide interface and can limit unnecessary heat and surface wear during repeated operation.
Is this part used for elastic attaching?
Yes. The listed machine applications include multi-needle elastic-attaching operations such as waistband and waistline work. These applications require consistent needle positioning across multiple parallel rows of stitching.
Can this guide plate be used on Siruba VC008?
The supplied compatibility information lists Siruba VC008 as an additional compatible machine. Because machine revisions can differ, compare the existing guide plate’s part number, dimensions and mounting arrangement before ordering.
Can I use this on any multi-needle sewing machine?
No. Multi-needle machines can use different guide-plate dimensions and mounting arrangements. The machine’s general category is not enough to establish compatibility; the existing 69-120 / 69120 reference and physical configuration should be checked.
How do I know when the guide plate needs replacement?
Look for visible grooves, scoring, deformation or excessive clearance around the guide surface. Unusual needle-bar side movement, vibration or inconsistent needle positioning can also indicate wear in the guide mechanism.
Does replacing the guide plate automatically correct needle alignment?
No. The guide plate provides the mechanical guiding surface, but correct installation and machine adjustment are still required. After replacement, the needle-bar movement and clearances should be checked before returning the machine to production.
Should I replace other components at the same time?
Not automatically. Inspect the mating needle-bar components, mounting hardware and related guide surfaces first. Replace additional parts only when they show wear, damage or excessive clearance.
