घर » दुकान » Bobbin Winder Screwdriver for Sewing Machine
Seam Ripper Tool for Tailoring and Stitch Removal – cutting blade
Seam Ripper Tool for Tailoring and Stitch Removal मूल कीमत थी: ₹50.00.वर्तमान कीमत है: ₹20.00.
उत्पादों पर वापस जाएँ
Tracking Wheel for Garment Pattern Making – rotating wheel
Tracking Wheel for Garment Pattern Making मूल कीमत थी: ₹50.00.वर्तमान कीमत है: ₹20.00.

Bobbin Winder Screwdriver for Sewing Machine

Short Description

Bobbin winder screwdriver for adjusting the bobbin winder screw during sewing machine repair.

मूल कीमत थी: ₹50.00.वर्तमान कीमत है: ₹20.00.

🚚 अनुमानित डिलिवरी
5 लोग अभी इस उत्पाद को देख रहे हैं!

A bobbin winder screwdriver is a small screwdriver for adjusting the bobbin winder screw during sewing machine repair. It suits the small adjustment screws found on many bobbin winders. Use it when the bobbin fills unevenly or the winder stops at the wrong point.

What the Bobbin Winder Screwdriver Does

A bobbin winder fills the bobbin with thread before you sew. On many machines, a small screw sets where the winder stops and how it engages.

Adjusting the Stop Position

A winder that stops too early leaves the bobbin partly empty. A winder that runs past the stop point overfills the bobbin and can cause thread problems. Adjust the stop screw until the bobbin fills to the edge without overflowing.

Fixing Uneven Bobbin Fill

Uneven winding often points to a loose winder tire or a misaligned winder arm. Tighten the adjustment screw in small steps. Wind a test bobbin after each change to check the result.

Protecting the Screw Head

Worn screw heads slip and damage the adjustment. Use a screwdriver that fits the head snugly. Keep the tip clean and replace it when it starts to round off.

Confirm These Details Before You Order

Check the tip size on the product listing before you order. Match the tip to the screw head on your machine model. Confirm the tip type with the seller if the screw head looks unusual.

How to Use the Bobbin Winder Screwdriver

First, switch off and unplug the machine. Next, locate the bobbin winder adjustment screw using the machine manual. Then, turn the screw a small amount and test the winding. Finally, tighten the screw and wind a full test bobbin before you return the machine to service.

Frequently Asked Questions About the Bobbin Winder Screwdriver

Is this screwdriver suitable for all sewing machines?

No. It suits many bobbin winder screws, but the tip must match your screw head. Check the screw type on your machine before you order. If the screw head is different, ask the seller about a matching tip.

Who uses this screwdriver?

It is suited to tailoring workshops, technicians and home sewers who need a small bobbin winder adjustment. Keep the screwdriver with your other repair tools.

Why Buy the Bobbin Winder Screwdriver from StitchPartner

StitchPartner ships pan-India and offers Cash on Delivery on eligible orders.

YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors

स्टॉक में

मूल्य सीमा: ₹550.00 से ₹650.00 तक
विकल्प चुनें इस उत्पाद के कई प्रकार उपलब्ध हैं। आप उत्पाद पृष्ठ पर जाकर विकल्प चुन सकते हैं।
Weight0.5 किलोग्राम
कैंची का आकार10, 11, 12

PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter

स्टॉक में

मूल कीमत थी: ₹3,500.00.वर्तमान कीमत है: ₹2,999.00.
कार्ट में जोड़ें
Weight0.5 किलोग्राम

इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज

स्टॉक में

मूल कीमत थी: ₹6,000.00.वर्तमान कीमत है: ₹4,500.00.
कार्ट में जोड़ें
Weight0.5 किलोग्राम

15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स

स्टॉक में

मूल कीमत थी: ₹999.00.वर्तमान कीमत है: ₹249.00.
कार्ट में जोड़ें
Weight0.5 किलोग्राम

मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन

स्टॉक में

मूल कीमत थी: ₹7,999.00.वर्तमान कीमत है: ₹7,000.00.
कार्ट में जोड़ें
Weight5 किलोग्राम
Dimensions38 × 38 × 10 सेमी

YS-4454 Button Holer Attachment for Sewing Machines

स्टॉक में

मूल कीमत थी: ₹2,000.00.वर्तमान कीमत है: ₹1,399.00.
कार्ट में जोड़ें
Weight1 किलोग्राम

NRV 1/2 Inch Non-Return Valve for Steam Iron

स्टॉक में

मूल कीमत थी: ₹999.00.वर्तमान कीमत है: ₹699.00.
कार्ट में जोड़ें
Weight.5 किलोग्राम

18A/25A Contactor for Industrial Steam Iron Boiler

स्टॉक में

मूल्य सीमा: ₹1,499.00 से ₹1,799.00 तक
विकल्प चुनें इस उत्पाद के कई प्रकार उपलब्ध हैं। आप उत्पाद पृष्ठ पर जाकर विकल्प चुन सकते हैं।
Ampere18Amp, 25amp

A bobbin winder screwdriver is a small screwdriver for adjusting the bobbin winder screw during sewing machine repair. It suits the small adjustment screws found on many bobbin winders. Use it when the bobbin fills unevenly or the winder stops at the wrong point.

What the Bobbin Winder Screwdriver Does

A bobbin winder fills the bobbin with thread before you sew. On many machines, a small screw sets where the winder stops and how it engages.

Adjusting the Stop Position

A winder that stops too early leaves the bobbin partly empty. A winder that runs past the stop point overfills the bobbin and can cause thread problems. Adjust the stop screw until the bobbin fills to the edge without overflowing.

Fixing Uneven Bobbin Fill

Uneven winding often points to a loose winder tire or a misaligned winder arm. Tighten the adjustment screw in small steps. Wind a test bobbin after each change to check the result.

Protecting the Screw Head

Worn screw heads slip and damage the adjustment. Use a screwdriver that fits the head snugly. Keep the tip clean and replace it when it starts to round off.

Confirm These Details Before You Order

Check the tip size on the product listing before you order. Match the tip to the screw head on your machine model. Confirm the tip type with the seller if the screw head looks unusual.

How to Use the Bobbin Winder Screwdriver

First, switch off and unplug the machine. Next, locate the bobbin winder adjustment screw using the machine manual. Then, turn the screw a small amount and test the winding. Finally, tighten the screw and wind a full test bobbin before you return the machine to service.

Frequently Asked Questions About the Bobbin Winder Screwdriver

Is this screwdriver suitable for all sewing machines?

No. It suits many bobbin winder screws, but the tip must match your screw head. Check the screw type on your machine before you order. If the screw head is different, ask the seller about a matching tip.

Who uses this screwdriver?

It is suited to tailoring workshops, technicians and home sewers who need a small bobbin winder adjustment. Keep the screwdriver with your other repair tools.

Why Buy the Bobbin Winder Screwdriver from StitchPartner

StitchPartner ships pan-India and offers Cash on Delivery on eligible orders.

तेज़ शिपिंग

वाहक जानकारी

कैश ऑन डिलीवरी उपलब्ध

भुगतान के तरीके

सहायता के लिए कॉल करें

असीमित हेल्प डेस्क

व्हाट्सएप

पुर्जे नहीं मिल रहे? अपनी तस्वीरें यहाँ भेजें।.