Jupiter Scissor Nut Bolt – Pivot Screw for Tailor Scissors

The Jupiter Scissor Nut Bolt is a replacement pivot screw and nut set sized for Jupiter tailor scissors in the 10, 11 and 12 inch sizes. It is best for tailors and boutique owners whose scissors have gone loose, stiff or hard to cut with, since a worn or stripped pivot screw is usually the real cause — not a problem with the blades themselves.

प्रमुख विशेषताऐं

• 4-side square shoulder under the screw head that locks into the matching square hole in the scissor blade, so the screw stays still while you turn the nut from the other side — the same square-neck design used on carriage bolts, and it lets you tighten or loosen the pivot one-handed with a single screwdriver instead of holding both ends.
• Sized to fit Jupiter tailor scissors in 10, 11 and 12 inch sizes, so one part covers StitchPartner’s full Jupiter scissor range.
• Complete pivot set — nut, bolt/screw and a flat washer — not just a loose screw.
• One price (₹59) across all three sizes, so there’s no need to work out a separate cost per size.

उपयोग के मामले

Replace a scissor pivot that has gone loose, lost its original screw, or had the screw slot strip out from repeated tightening. Keep as a standard spare in a tailoring shop so a worn pivot doesn’t take a whole pair of scissors out of use.

फ़ायदे

Fixing the pivot costs a fraction of a new pair of scissors and takes a couple of minutes with a screwdriver. Using original-fit hardware, rather than a generic mismatched screw, keeps the blade tension and cutting action close to the scissor’s original setting.

विशेष विवरण

How to Fit the Jupiter Scissor Nut Bolt

First, loosen the scissors’ original pivot nut fully and lift out the old or damaged screw. Next, match the Jupiter Scissor Nut Bolt to your scissor’s size (10, 11 or 12 inch) before fitting it. Then, slide the square shoulder of the new screw into the matching square hole on the blade so it seats flush and cannot turn. Finally, fit the washer and nut on the other side and tighten with a screwdriver, checking that the blades open and close smoothly without excess play.

Frequently Asked Questions About the Jupiter Scissor Nut Bolt

Will this nut bolt fit my Jupiter scissors?

It fits Jupiter tailor scissors in the 10, 11 and 12 inch sizes that StitchPartner stocks. Check your scissor’s size — usually stamped near the pivot, such as A-250 for the 10 inch model — before ordering, since a mismatched size will not seat flush in the blade’s square hole.

What’s included in the pack?

Each set includes the pivot bolt/screw, a matching nut, and a flat washer — everything needed to refit one scissor pivot. It does not include a screwdriver or spanner, which most tailoring shops already have on hand.

Can I use this on a non-Jupiter scissor?

It is sized and shaped specifically for Jupiter tailor scissors. Other brands often use a different screw diameter or a round rather than square shoulder, so fitting it to a different brand’s scissor isn’t guaranteed — check the hole shape on your scissor blade first if it isn’t a Jupiter.

Why does my scissor feel loose even after tightening the nut?

A pivot that stays loose after tightening usually means the screw’s square shoulder has worn round, so it spins instead of staying fixed — at that point tightening the nut no longer clamps the blades together. Replacing the screw and nut as a set, rather than just the nut, usually fixes it.

How do I know which size Jupiter scissor I have — 10, 11 or 12 inch?

Jupiter tailor scissors are usually stamped with a size or model number near the pivot, such as A-250 for the 10 inch model. Measuring the scissor’s full length from tip to handle end is a reliable backup check if the stamp has worn off.

Related Products

Browse the full कपड़ा काटने वाली कैंची category, or see the scissors this part fits: Jupiter Tailor Scissor A-250, A-275, A-300 और Jupiter Gold Handle Tailor Scissors 10 Inch.

Why Buy the Jupiter Scissor Nut Bolt from StitchPartner

StitchPartner ships pan-India and offers Cash on Delivery on eligible orders. Send us your scissor size or model number and we’ll confirm the right nut bolt before you order.