-18% नया

Carbon brush holder replacement cap and sleeve for Cupid cloth cutting machine

Cupid electric cloth cutting machine carbon brush holder spare part

बड़ा करने के लिए क्लिक करें

Carbon brush holder with brass sleeve for electric fabric cutter motor

Replacement motor carbon brush holder for Cupid rotary cloth cutter

Cupid 125mm lower base clamp replacement

Carbon Brush Holder for Cupid Cloth Cutting Machine

श्रेणियाँ: कूपिड ब्रांड, काटने की मशीन

मूल कीमत थी: ₹120.00.वर्तमान कीमत है: ₹99.00.

9 लोग अभी इस उत्पाद को देख रहे हैं!

तेज़ शिपिंग

वाहक जानकारी

कैश ऑन डिलीवरी उपलब्ध

भुगतान के तरीके

सहायता के लिए कॉल करें

असीमित हेल्प डेस्क

व्हाट्सएप

पुर्जे नहीं मिल रहे? अपनी तस्वीरें यहाँ भेजें।.

उत्पाद वर्णन

Replace a worn or damaged motor brush housing with this Carbon Brush Holder for Cupid Cloth Cutting Machine. It is designed to hold the carbon brush securely against the motor commutator, helping maintain stable electrical contact and consistent motor rotation.

This replacement cap and sleeve set is suitable for Cupid electric rotary fabric cutting machines, including mini handheld cutters with round or octagonal blades. It can also suit similar mini electric cloth cutting machines when the existing brush holder matches the required housing and threading dimensions.

The holder is an important part of the motor brush assembly. A loose, worn, or damaged holder can affect brush contact and may contribute to sparking, uneven brush wear, or inconsistent motor operation.

प्रमुख विशेषताऐं

Secure carbon brush positioning: Keeps the brush firmly aligned with the motor commutator.
Heat-resistant insulating body: Black phenolic resin/polymer construction helps provide electrical insulation around the brush assembly.
Brass sleeve: The internal brass sleeve provides a conductive and durable guide for the carbon brush.
Motor protection: Proper brush positioning can help reduce uneven contact, excessive sparking, and power fluctuations caused by a poorly seated brush.
Replacement-friendly design: Screw-fit threading allows the holder to be replaced during routine motor maintenance.
पैकेज मात्रा: 1 Piece.

मशीन अनुकूलता

This carbon brush holder is intended for Cupid electric cloth cutting machines and compatible mini rotary fabric cutters with matching motor brush housing specifications.

मशीन का प्रकार	अनुकूल
Cupid Mini Electric Cloth Cutting Machine	हाँ
Cupid Electric Rotary Fabric Cutter	हाँ
Cupid Round/Octagonal Blade Cutter	हाँ
Similar 50–70mm Electric Fabric Cutter	Yes, if dimensions match
Marble Cutter / Power Tool	Not confirmed

महत्वपूर्ण: Compatibility with similar machines depends on the brush holder’s shape, threading, sleeve arrangement, and dimensions. Please verify the shape and measurements of your existing part before purchasing.

Why Replace the Carbon Brush Holder?

The carbon brush needs stable contact with the motor commutator to transfer electrical current effectively. If the holder becomes loose, cracked, worn, or damaged, the brush may not remain correctly positioned.

Replacing the holder can help restore proper brush alignment and reduce problems associated with poor brush contact. It is particularly useful during routine servicing of electric cloth cutting machines when replacing worn carbon brushes.

For professional tailoring shops, garment units, textile workshops, and fabric-cutting operators, replacing a small motor component can help avoid unnecessary machine downtime.

Best Use

This replacement carbon brush holder is suitable for maintenance and repair of electric fabric cutting equipment used for:

Garment fabric cutting
Tailoring work
वस्त्र उत्पादन
Boutique cutting
Multi-layer fabric cutting
General apparel fabric preparation

It is a machine spare part, not a cutting blade or carbon brush itself.

How To Replace

Switch off and unplug the cloth cutting machine completely.
Allow the motor to cool before starting maintenance.
Remove the existing damaged or worn brush holder according to the machine’s construction.
Inspect the carbon brush and replace it if it is worn.
Insert the carbon brush correctly into the new holder and brass sleeve.
Fit the holder securely into the motor housing.
Check that the brush moves and seats correctly without excessive looseness.
Reassemble the machine and test it briefly before normal operation.

If you are unsure about the motor assembly, have the replacement carried out by a qualified technician.

अक्सर पूछे जाने वाले प्रश्नों

Is this carbon brush holder compatible with Cupid cloth cutting machines?

हाँ।. This replacement carbon brush holder is designed for specified Cupid electric rotary cloth cutting machines and mini handheld fabric cutters. For similar machines, compatibility depends on the existing holder’s shape, threading, sleeve arrangement, and dimensions. Always compare the replacement with your original part before ordering.

Does this product include the carbon brush?

नहीं।. This listing is for 1 carbon brush holder replacement cap and sleeve set. The carbon brush itself is not included unless specifically mentioned in the product package details. If your existing brush is worn, check its condition separately before installing the new holder.

What does a carbon brush holder do in a cloth cutting machine?

The carbon brush holder keeps the carbon brush correctly positioned against the motor commutator. This allows electrical current to transfer through the brush while the motor rotates. A properly seated brush can provide more stable contact and help reduce problems associated with a loose or incorrectly positioned brush.

Can I use this holder on another electric fabric cutter?

Possibly, but dimensions must match. Similar mini rotary cloth cutting machines can use comparable motor brush assemblies, but visual similarity alone does not confirm compatibility. Check the holder’s shape, threading, brass sleeve arrangement, and measurements against your existing component before purchasing.

What are the signs of a damaged carbon brush holder?

Common signs can include a loose carbon brush, unstable brush contact, excessive sparking, inconsistent motor operation, or visible cracking or damage around the holder. These symptoms can also have other causes, so inspect the carbon brush, commutator, wiring, and motor assembly before replacing the holder.

MACHINE COMPATIBILITY TABLE

मशीन का प्रकार	अनुकूल
Cupid Mini Electric Cloth Cutting Machine	हाँ
Cupid Electric Rotary Fabric Cutter	हाँ
Cupid Round/Octagonal Blade Cutter	हाँ
Similar 50–70mm Electric Fabric Cutter	Yes, if dimensions match
Marble Cutter / Power Tool	Not confirmed

BEST FABRIC TYPES

The holder is a motor spare part, so fabric type does not determine the holder’s compatibility directly. It can be used as a replacement component in compatible Cupid electric cloth cutting machines used for cutting common apparel and textile materials.

These machines may be used for materials such as cotton, denim, polyester, canvas, and other apparel textiles, depending on the cutting machine, blade size, and fabric thickness.