सिंगल नीडल लॉक-स्टिच मशीन एफडी सीरीज़ के लिए जैक नीडल प्लेट

यह Jack needle plate fits सिंगल नीडल लॉक-स्टिच मशीनें in the FD18, FD20, FD22 and FD24 size range. It supplies the needle hole and feed dog opening beneath the presser foot, and is designed to work with the matching Jack single-needle lockstitch feed dog.

के लिए सर्वश्रेष्ठ

Tailoring units and garment factories running Jack single-needle lockstitch machines on light-to-medium fabrics, choosing the FD18/FD20/FD22/FD24 size to match their machine’s stitch-length gauge.

Why Replace This Plate

• Restores accurate needle-hole alignment for consistent lockstitch formation
• Smooth surface prevents fabric bunching and thread fraying
• Available in FD18, FD20, FD22 and FD24 sizes to match your machine’s gauge
• Keeps the feed dog opening correctly sized for smooth fabric feed

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the presser foot. Remove the presser foot and slide plate, unscrew the old needle plate, and fit the correctly sized FD plate with the needle hole aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.

पूछे जाने वाले प्रश्न

How do I pick the right FD size? Match the size marking (FD18/FD20/FD22/FD24) on your machine’s existing plate — these correspond to different stitch-length or gauge settings.

Should I replace the feed dog too? If fabric still feeds unevenly, check the matching feed dog for worn teeth, since this plate is designed to work with it.

What fabrics is this suited to? Light to medium-weight wovens and knits typical of general garment production on single-needle lockstitch machines.