जुकी सिंगल नीडल लॉक-स्टिच मशीन एच सीरीज़ के लिए नीडल प्लेट

यह heavy-duty sui plate fits जुकी सिंगल नीडल लॉक-स्टिच मशीनें in the H18, H20, H22 and H24 size range. It supplies the needle hole and feed dog opening beneath the presser foot, and the same H-series hole pattern is also used on other single-needle lockstitch machines built to the same standard, including Jack single-needle lockstitch models.

के लिए सर्वश्रेष्ठ

Industrial and tailoring units running Juki (or Juki-pattern) single-needle lockstitch machines on light-to-medium fabrics, choosing the H18/H20/H22/H24 size to match their machine’s gauge.

Why Replace This Plate

• Restores accurate needle-hole alignment for consistent lockstitch formation
• Smooth surface prevents fabric bunching and thread fraying
• Available in H18, H20, H22 and H24 sizes to match your machine’s gauge
• Keeps the कुत्ते को खाना खिलाओ opening correctly sized for smooth fabric feed

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the presser foot. Remove the presser foot and slide plate, unscrew the old needle plate, and fit the correctly sized H plate with the needle hole aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.

पूछे जाने वाले प्रश्न

How do I pick the right H size? Match the size marking (H18/H20/H22/H24) on your machine’s existing plate before ordering.

Does this fit other brands besides Juki? The H-series hole pattern is used across several single-needle lockstitch machines including Jack; confirm your machine’s existing plate carries the same size marking before ordering.

Should I replace the feed dog too? If fabric still feeds unevenly, check the matching feed dog for worn teeth.