End Cutter Detech Cutman 110mm Cloth Cutting Machine

The Detech Cutman 110mm Cloth Cutting Machine is best for garment factories, boutique cutting tables, and tailoring units that want a 110mm round-knife cutter with a brushless motor for daily multi-layer fabric cutting. Unlike the standard Cutman 110 line, which runs on a brushed motor with a wearing armature, this version uses a brushless, rotor-driven motor with no armature to wear out.

Why the Brushless Motor Makes This Cutman 110 Different

Many 110mm and 125mm round-knife cutters use a brushed motor: carbon brushes ride against a commutator to power the armature, and that contact wears down over time until the armature needs replacing. The Cutman 110’s brushless motor removes that wearing contact entirely. A rotor handles the job electronically instead of an armature, so there are no brushes to wear out and no brush-commutator arcing, which can also add noise and heat in a brushed design.

The drive itself is belt-driven rather than gear-driven. A belt is simpler to inspect, tension, and swap on the shop floor than stripping down a gear head, so routine servicing stays quick.

प्रमुख विशेषताऐं

• Brushless, rotor-driven motor — no armature to wear out or replace
• Belt-driven mechanism for straightforward field repair
• Designed to run quieter than brushed cutters of the same blade size
• 110mm round blade sized for compact, maneuverable multi-layer cutting

Who It’s Built For

This machine suits garment manufacturing units and cutting rooms slicing stacked cotton, denim, and knit fabric for daily production, as well as boutique owners and tailoring shops that need a manoeuvrable cutter for smaller cutting tables.

Detech Cutman 110mm Cloth Cutting Machine Specifications

Related spares are listed on the store, including the 110mm/125mm worm gear, , replacement handle और यह 6 Amp ON/OFF switch. Confirm the part against your machine before you order.

How to Use the Cutman 110

First, place the machine flat on a stable cutting table with the fabric stack squared off underneath it. Next, switch on the motor and let the blade reach full speed before it touches the fabric. Then, guide the machine steadily along your cutting line, letting the blade do the work rather than forcing it through the stack. Finally, switch off and let the blade coast to a complete stop before lifting or setting the machine down.

अक्सर पूछे जाने वाले सवाल

How many fabric layers can it cut in one pass?

It’s built for roughly 25–30 layers of light-to-medium fabric, with a cutting height of about 30–35mm — standard capacity for a 110mm round-knife blade. For thicker stacks or heavier fabric, our Detech Arrow Cut 125mm Cloth Cutting Machine offers more cutting height.

Is it noisy to run on a factory floor?

It is designed to run quieter than brushed cutters of the same size, since there’s no brush-to-commutator friction or arcing. No decibel rating is listed.

Is it suitable for heavier fabric like denim?

Yes, for typical multi-layer denim stacks within its 30–35mm cutting height. Measure your stack height before you order.