E868 नीडल प्लेट सिरुबा 757 5वीं ओवरलॉक सिलाई मशीन
Short Description
Genuine E868 needle plate for Siruba 757 5-thread overlock machines. Pairs with the H497/0581 feed dog and KG153 needle clamp.
₹180.00
The E868 needle plate is the genuine throat plate for Siruba 757 5-thread overlock machines. It provides the needle and looper clearance holes beneath the presser foot and is designed to work with the H497/0581 5-thread feed dog fitted to the same 757 model.
के लिए सर्वश्रेष्ठ
Garment factories running Siruba 757 5-thread safety-stitch seams, where a worn E868 plate causes skipped stitches or uneven fabric feed.
Why Replace This Plate
- Restores correct needle alignment for consistent 5-thread overlock stitches
- Smooth surface prevents fabric snagging on layered or stretch fabrics
- Matches the E868 hole pattern used on Siruba 757 models
- Pairs with the H497/0581 feed dog and KG153 needle clamp used on the same 757 model
मशीन अनुकूलता
| ब्रांड | मशीन का प्रकार | नमूना |
|---|---|---|
| सिरुबा | 5-Thread Overlock | 757 5TH (E868 needle plate) |
विशेष विवरण
| Part Number | E868 |
|---|---|
| भाग प्रकार | Needle Plate (Sui Plate) |
| मशीन मॉडल | Siruba 757 5-Thread |
| Matching Feed Dog | H497/0581 |
| Matching Needle Clamp | KG153 |
How to Replace the Needle Plate
Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the E868 plate with needle holes aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.
पूछे जाने वाले प्रश्न
Should I replace the feed dog too? If fabric still feeds unevenly, check the H497/0581 feed dog for worn teeth.
What if stitches still skip after fitting this plate? Check the KG153 needle clamp and inspect the loopers for wear.
Does this fit the standard 757 (non-5TH) model? This plate is made for the 757 5-thread version; confirm your machine’s existing plate carries the E868 part number before ordering.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The E868 needle plate is the genuine throat plate for Siruba 757 5-thread overlock machines. It provides the needle and looper clearance holes beneath the presser foot and is designed to work with the H497/0581 5-thread feed dog fitted to the same 757 model.
के लिए सर्वश्रेष्ठ
Garment factories running Siruba 757 5-thread safety-stitch seams, where a worn E868 plate causes skipped stitches or uneven fabric feed.
Why Replace This Plate
- Restores correct needle alignment for consistent 5-thread overlock stitches
- Smooth surface prevents fabric snagging on layered or stretch fabrics
- Matches the E868 hole pattern used on Siruba 757 models
- Pairs with the H497/0581 feed dog and KG153 needle clamp used on the same 757 model
मशीन अनुकूलता
| ब्रांड | मशीन का प्रकार | नमूना |
|---|---|---|
| सिरुबा | 5-Thread Overlock | 757 5TH (E868 needle plate) |
विशेष विवरण
| Part Number | E868 |
|---|---|
| भाग प्रकार | Needle Plate (Sui Plate) |
| मशीन मॉडल | Siruba 757 5-Thread |
| Matching Feed Dog | H497/0581 |
| Matching Needle Clamp | KG153 |
How to Replace the Needle Plate
Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the E868 plate with needle holes aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.
पूछे जाने वाले प्रश्न
Should I replace the feed dog too? If fabric still feeds unevenly, check the H497/0581 feed dog for worn teeth.
What if stitches still skip after fitting this plate? Check the KG153 needle clamp and inspect the loopers for wear.
Does this fit the standard 757 (non-5TH) model? This plate is made for the 757 5-thread version; confirm your machine’s existing plate carries the E868 part number before ordering.
