202618 नीडल प्लेट पेगासस ओवरलॉक मशीन

The 202618 needle plate is the genuine throat plate for Pegasus overlock sewing machines built around this part number. It provides the needle and looper clearance holes beneath the presser foot and works with the machine’s कुत्ते को खाना खिलाओ to carry fabric evenly under the needles.

के लिए सर्वश्रेष्ठ

Tailoring units and garment factories running Pegasus overlock seams where a worn or chipped 202618 plate is causing skipped stitches or fabric snagging.

Why Replace This Plate

• Restores correct needle alignment for clean, skip-free overlock stitches
• Smooth surface stops fabric snagging on worn grooves
• Matches the 202618 hole pattern used on compatible Pegasus overlock machines
• Extends the life of the feed dog and needles by keeping fabric feed consistent

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Switch off the machine and lift the presser foot. Remove the presser foot and cover, unscrew the worn plate, and fit the new 202618 plate with the needle holes aligned squarely under the needle bar. Tighten evenly, rotate the handwheel by hand to confirm clearance, then reattach the presser foot and test on scrap fabric.

पूछे जाने वाले प्रश्न

Should I check the feed dog too? Yes — if stitching stays uneven after this plate change, inspect the कुत्ते को खाना खिलाओ for worn teeth, since both parts work together.

What if stitches still skip? Check needle height and timing, and inspect the loopers for wear.

How do I confirm fitment? Match the part number on your machine’s existing plate against 202618 before ordering.