257053B56 नीडल प्लेट पेगासस फ्लैटबेड इंटरलॉक मशीन

The 257053B56 needle plate is the genuine throat plate for Pegasus flatbed interlock machines. It sits beneath the presser foot and works with the machine’s feed dog to guide fabric evenly under the needles during interlock stitching.

के लिए सर्वश्रेष्ठ

Garment factories and tailoring units running Pegasus flatbed interlock seams on knits and wovens, where a worn plate edge causes skipped stitches or fabric snagging.

Why Replace This Plate

• Restores accurate needle-hole alignment for consistent interlock stitch formation
• Smooth ground surface reduces vibration and fabric snagging
• Matches the 257053B56 hole pattern used on Pegasus flatbed interlock models
• Extends the working life of the कुत्ते को खाना खिलाओ it works alongside by keeping fabric feed even

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old needle plate, and fit the 257053B56 plate with needle holes aligned squarely under the needle bar. Tighten the mounting screws evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test on scrap fabric.

पूछे जाने वाले प्रश्न

Do I need to replace the feed dog at the same time? If fabric still feeds unevenly after fitting this plate, inspect the कुत्ते को खाना खिलाओ for worn teeth, since the two parts work together.

What if interlock stitches still skip? Check needle height and inspect the loopers for wear or timing issues.

How do I confirm this is the right plate for my machine? Compare the part number stamped on your existing plate against 257053B56 before ordering, since Pegasus interlock models use several similar-looking plates.