3108134 नीडल प्लेट यामातो सिलाई मशीन

The 3108134 needle plate is the genuine throat plate for Yamato overlock/safety-stitch machines built around this part number. It sits beneath the presser foot, providing the needle and looper clearance holes, and works with the machine’s feed dog and 34393 lower looper to form the stitch.

के लिए सर्वश्रेष्ठ

Garment factories running Yamato overlock seams, where a worn 3108134 plate causes skipped stitches or fabric snagging.

Why Replace This Plate

• Restores correct needle alignment for consistent overlock stitching
• Smooth ground surface prevents fabric bunching and thread fraying
• Matches the 3108134 hole pattern used on compatible Yamato machines
• Works correctly with a properly seated 34393 lower looper for clean stitch formation

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the 3108134 plate with needle holes aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.

पूछे जाने वाले प्रश्न

What if stitches still skip after fitting this plate? Check the 34393 lower looper for wear or incorrect timing.

Should I check the feed dog too? If fabric still feeds unevenly, inspect the कुत्ते को खाना खिलाओ for worn teeth.

How do I confirm this fits my machine? Match the part number stamped on your existing plate against 3108134 before ordering.