B2402-762-000 नीडल प्लेट जुकी LBH-762 बटन होल सिलाई मशीन

The B2402-762-000 needle plate is the genuine throat plate for the Juki LBH-762 buttonhole sewing machine. It sits beneath the work clamp and feed dog, supplying the needle clearance hole that keeps buttonhole stitching accurate and prevents fabric bunching or puckering around the cut.

के लिए सर्वश्रेष्ठ

Garment units and tailoring workshops running the Juki LBH-762 for buttonhole production, where a worn or grooved plate is causing uneven buttonhole edges or thread snagging.

Why Replace This Plate

• Restores accurate needle-hole alignment for neat, uniform buttonholes
• Smooth surface prevents fabric bunching and thread fraying
• Matches the B2402-762-000 hole pattern used on the LBH-762
• Keeps कुत्ते को खाना खिलाओ movement in sync with the plate for consistent fabric feed

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the work clamp. Remove the clamp and cover, unscrew the old plate, and fit the B2402-762-000 plate with the needle hole aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clear needle passage, then reassemble and test on scrap fabric before production runs.

पूछे जाने वाले प्रश्न

Does this fit other Juki buttonhole models? It is made specifically for the LBH-762; confirm your machine’s existing plate carries the B2402-762-000 part number before ordering.

What if buttonholes still look uneven after fitting this plate? Check the feed dog and work clamp timing, since both affect how fabric sits under the needle during the buttonhole cycle.

How often should this plate be replaced? Replace it when the surface shows visible grooving or burrs, or when buttonholes start showing skipped stitches despite correct threading and timing.