257018B48 Needle Plate for Sewing Machine

The 257018B48 needle plate is a throat plate built for sewing machines using this part number, part of the same 257018B numbering family as the 257018B56 Pegasus flatbed interlock plate also stocked on this site, though fitted to machines set up for a different stitch width. It sits beneath the presser foot, providing the needle hole and feed dog opening that keeps stitch formation accurate.

के लिए सर्वश्रेष्ठ

Tailoring units and garment workshops running machines fitted with the 257018B48 plate, where a worn or damaged surface is causing skipped stitches.

Why Replace This Plate

• Restores accurate needle-hole alignment for consistent stitching
• Smooth surface prevents fabric snagging and thread fraying
• Matches the 257018B48 hole pattern for correct fitment
• Keeps the कुत्ते को खाना खिलाओ opening correctly sized for smooth fabric movement

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Switch off the machine and raise the presser foot. Remove the presser foot and cover, unscrew the old plate, and fit the 257018B48 plate with the needle hole aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clear needle passage, then reattach the presser foot and test on scrap fabric.

पूछे जाने वाले प्रश्न

How do I confirm this fits my machine? Match the part number stamped on your existing plate against 257018B48 before ordering.

Should I check the feed dog too? If fabric still feeds unevenly after this plate change, inspect the कुत्ते को खाना खिलाओ for worn teeth.

What if stitches still skip after fitting this plate? Check needle height and inspect the loopers for wear if your machine is an overlock or interlock type.