34206-771-000 Needle Plate for JUKI Buttonhole Machine

यह 34206-771-000 needle plate supports fabric under the needle on Juki buttonhole machines, providing the needle hole and feed dog opening for stitch formation. A worn or damaged plate causes skipped stitches and uneven buttonhole edges — replacing it restores accurate, clean stitching.

के लिए सर्वश्रेष्ठ

Garment factories and tailoring units running Juki buttonhole machines fitted with the 34206-771-000 plate, where visible grooving or burrs on the plate surface are affecting stitch quality.

Why Replace This Plate

• Restores accurate needle-hole alignment for neat, uniform buttonholes
• Smooth surface prevents fabric bunching and thread fraying
• Matches the 34206-771-000 hole pattern used on compatible Juki buttonhole models
• Keeps the कुत्ते को खाना खिलाओ opening correctly sized for smooth fabric movement

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the work clamp. Remove the clamp and cover, unscrew the old plate, and fit the 34206-771-000 plate with the needle hole aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clear needle passage, then reassemble and test on scrap fabric.

पूछे जाने वाले प्रश्न

How do I confirm this fits my Juki buttonhole machine? Match the part number stamped on your existing plate against 34206-771-000 before ordering, since Juki buttonhole models use several similar-looking plates.

What if buttonholes still look uneven? Check the feed dog and work clamp timing, since both affect how fabric sits under the needle during the buttonhole cycle.

When should this plate be replaced? Replace it when the surface shows visible grooving or burrs, or when buttonholes show skipped stitches despite correct threading.