Pegasus M700 007150 Looper Holder Screw

The Pegasus M700 007150 screw is a replacement machine screw for selected Pegasus M700-series overlock sewing machine assemblies. It helps secure internal mechanical components where the correct part number and fit are required. The Pegasus M732 parts documentation lists 007150 as an M6 × 12 bolt, including applications in the needle-drive and looper mechanisms.

Therefore, this 007150 replacement screw can be useful when servicing or rebuilding compatible Pegasus overlock machine assemblies. However, because sewing machine screws can look very similar while serving different positions, you should always compare the existing screw, part number, thread size, and location before ordering.

प्रमुख विशेषताऐं

• Part Number: 007150
• Product Type: Sewing machine replacement screw/bolt
• Application: Industrial overlock / serger machine assembly
• Documented Size: M6 × 12 in Pegasus M732 parts documentation
• पैक मात्रा: 1 टुकड़ा
• Suitable for replacement and machine maintenance
• Designed for use in specific mechanical assemblies rather than as a universal sewing machine screw

Moreover, current sewing-machine spare-parts listings identify 007150 as a Pegasus M700 looper-holder screw, which further supports its use within M700-series overlock assemblies.

मशीन अनुकूलता

The available Pegasus M732 parts documentation lists 007150 in multiple mechanical assemblies, including the needle-drive mechanism and lower-looper drive mechanism.

Confirmed/documented compatibility:

• Pegasus M732
• Pegasus M700-series applications where the original screw is Part #007150

The part documentation also references M752 and other M700-series configurations within the same parts system. However, the exact application can vary by machine version and assembly. Therefore, please verify the shape and measurements of your existing screw before purchasing.

Best Uses

This replacement screw is intended for sewing machine repair and maintenance. It can be useful when an original fastener is missing, damaged, worn, or no longer holds the relevant assembly securely.

For example, it may be used during:

• Overlock machine servicing
• Looper mechanism maintenance
• Needle-drive mechanism maintenance
• Replacement of damaged machine fasteners
• Industrial sewing machine repair
• Routine spare-parts replacement

Because the correct screw is important for mechanical alignment, avoid replacing it with a visually similar screw unless its specifications match.

Important Compatibility Information

Part numbers are especially important when buying sewing machine spares. The 007150 number appears in Pegasus parts documentation as an M6 × 12 bolt.

Also, third-party spare-parts listings specifically identify a “M700 Looper Holder Screw 007150.”

However, compatibility with other brands such as Jack, Siruba, Yamato, Zoje, or GEMSY should not be assumed simply because their machines may have similar overlock mechanisms.

Please verify the shape, thread, measurements, and location of your existing screw before purchasing.

Related StitchPartner Products

For machine maintenance, you can also explore industrial sewing machine spare parts and other सिलाई मशीन के सहायक उपकरण available from StitchPartner.

For additional machine-maintenance guidance, consult the relevant Pegasus parts documentation where applicable.

MACHINE COMPATIBILITY TABLE

 HOW TO USE

1. Switch off the sewing machine and disconnect the power supply.
2. Locate the screw that needs replacement.
3. Remove the existing fastener carefully using the appropriate tool.
4. Compare the old screw with the 007150 replacement.
5. Check the thread, length, head style, and installation position.
6. Install the replacement screw without forcing the thread.
7. Tighten it securely according to the machine assembly requirements.
8. Rotate or operate the mechanism manually first to confirm that everything moves correctly.
9. Finally, run the machine at low speed and check for unusual movement or looseness.

5. FREQUENTLY ASKED QUESTIONS

What is Pegasus 007150 screw used for?

The 007150 is a Pegasus sewing machine fastener used in specific mechanical assemblies. Pegasus M732 parts documentation lists it as an M6 × 12 bolt in mechanisms including the needle drive and lower looper drive.

Is 007150 compatible with Pegasus M700 machines?

Yes, 007150 is associated with Pegasus M700-series applications. However, the exact position can vary by machine model and assembly, so you should match the existing part before ordering.

What size is Pegasus 007150?

Pegasus M732 parts documentation identifies 007150 as an M6 × 12 bolt.

Is this screw compatible with Jack or Siruba overlock machines?

Compatibility with Jack or Siruba machines has not been reliably confirmed for this specific part number. Therefore, compare the original screw and machine parts documentation before purchasing.

How many screws are included?

This listing contains 1 piece of the 007150 replacement screw.

Can I use any M6 × 12 screw instead?

Not necessarily. Even when the thread dimensions appear similar, the head style, seating position, strength, and application can differ. Match the original part number and machine assembly whenever possible.