डायरेक्ट ड्राइव लॉक स्टिच मशीन के लिए 1013001400 एलईडी लाइट
Short Description
1013001400 LED light for Jack JK-9100 series direct-drive machines. ₹400, COD available, ships across India.
₹400.00
Part no. 1013001400 LED light for Jack direct-drive lockstitch machines. It lights the needle area, so replace it when the light is dim, flickers or has stopped working.
Fits
- जैक जेके-9100बी
- Jack JK-9100BHP
- Jack JK-9100BP
- Jack JK-9100BH-7
- Jack JK-9100BAP
When to Replace It
- The LED is dead, dim or flickering.
- The light works only when you tap or move the wire.
How to Replace It
- First, switch off and unplug the machine.
- Next, disconnect the old LED light.
- Then, connect and fit the new light in the same position.
- Finally, power on and check the needle area is lit.
अक्सर पूछे जाने वाले प्रश्न
How do I confirm this fits my machine?
Compare the part number or model in the Fits list with your machine and the old part. If unsure, send a photo of the old part and the model plate on WhatsApp before ordering and we will confirm.
The new light still does not come on. What now?
Check that the connector is seated fully. If it still fails, the fault may be in the supply to the light rather than the LED itself.
More parts: Jack 9100 / 9100BP / 9100BS spare parts.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
Part no. 1013001400 LED light for Jack direct-drive lockstitch machines. It lights the needle area, so replace it when the light is dim, flickers or has stopped working.
Fits
- जैक जेके-9100बी
- Jack JK-9100BHP
- Jack JK-9100BP
- Jack JK-9100BH-7
- Jack JK-9100BAP
When to Replace It
- The LED is dead, dim or flickering.
- The light works only when you tap or move the wire.
How to Replace It
- First, switch off and unplug the machine.
- Next, disconnect the old LED light.
- Then, connect and fit the new light in the same position.
- Finally, power on and check the needle area is lit.
अक्सर पूछे जाने वाले प्रश्न
How do I confirm this fits my machine?
Compare the part number or model in the Fits list with your machine and the old part. If unsure, send a photo of the old part and the model plate on WhatsApp before ordering and we will confirm.
The new light still does not come on. What now?
Check that the connector is seated fully. If it still fails, the fault may be in the supply to the light rather than the LED itself.
More parts: Jack 9100 / 9100BP / 9100BS spare parts.
