Product Description
के लिए सर्वश्रेष्ठ
This 4-hole thread guide is built for Kansai 4-needle elastic sewing machines, feeding thread evenly to each needle to prevent the thread breakage that happens when thread runs at an angle or catches on a worn guide.
What It Does
- Four dedicated thread holes, one per needle, for even thread delivery across the 4-needle bed
- Prevents thread breakage caused by misdirected or snagging thread feed
- Direct-fit replacement for Kansai 4-needle elastic machines
उपयोग के मामले
Garment factories running Kansai 4-needle elastic attach or elastic cover-stitch operations — waistbands, cuffs, and elastic-trim seams — depend on even thread feed across all four needles to avoid skipped stitches and thread snap-offs mid-run.
फ़ायदे
On a 4-needle machine, thread breakage on even one needle stops the whole line while an operator re-threads and restarts. A worn or bent thread guide is one of the more common causes — the thread starts catching or feeding at the wrong angle into the needle. Keeping a spare guide on hand cuts that downtime to a quick swap.
मशीन अनुकूलता
| Machine Series | अनुकूल |
|---|---|
| Kansai DFB-1404 | हाँ |
| Kansai DFB-1406 | हाँ |
| Kansai DFB-1408 | हाँ |
| Kansai DFB-1412 | हाँ |
Specs
| कल्पना | विवरण |
|---|---|
| Type | 4-hole thread guide |
| Needles served | 4 (one hole per needle) |
| Machine type | Kansai 4-needle elastic machine (DFB series) |
| समारोह | Even thread feed to needles, prevents thread breakage |
का उपयोग कैसे करें
First, switch off and unplug the machine before accessing the thread path. Next, remove the old thread guide, noting which hole feeds which needle. Then, fit the new 4-hole guide in the same position and re-thread each of the four needles through its corresponding hole. Finally, run the machine slowly on scrap fabric to confirm all four needles feed and stitch evenly before resuming production.
अक्सर पूछे जाने वाले प्रश्न
खरीदार का इरादा
Q: What does this thread guide actually fix?
It corrects uneven or misdirected thread feed to the needles on a Kansai 4-needle elastic machine — the usual symptom is repeated thread breakage on one or more needles that re-threading alone doesn’t solve, because the guide itself is worn, bent, or has a rough hole that snags the thread.
Q: How do I know if my thread guide needs replacing rather than just re-threading?
If thread keeps breaking at the same needle position even after re-threading and adjusting tension, check the guide holes for burrs, grooves worn by thread friction, or a bent guide arm — any of those will keep causing breaks until the guide is replaced.
अनुकूलता
Q: Will this fit Kansai models outside the DFB-1404/1406/1408/1412 range?
It’s specified for the DFB 4-needle elastic series. Kansai’s other multi-needle series (8-needle, 12-needle cover-stitch machines) use different thread guide part numbers with more or fewer holes, so confirm your exact model and needle count before ordering.
