Automatic Steam Boiler Iron System for Garment Pressing
Short Description
Automatic steam boiler iron system with a water feed pump and water level control for garment pressing.
मूल कीमत थी: ₹40,000.00.₹35,000.00वर्तमान कीमत है: ₹35,000.00.
The automatic steam boiler iron system feeds water to the boiler on its own. A pump and a water level control keep the boiler topped up during a shift. Use it when you press for long hours and do not want to refill a tank by hand.
How the Automatic Steam Boiler Iron System Works
A boiler turns water into steam for the iron. The water feed pump sends water to the boiler when the level drops. The level control stops the feed once the boiler reaches the set level.
Confirm These Details Before You Order
Check the pump type, boiler capacity and voltage on the label before you buy. Confirm your water supply and drain point suit the system. Match the setup to your press count and daily shift length.
How to Use the Automatic Steam Boiler Iron System
First, connect the water supply and check the feed line for leaks. Next, switch on the boiler and let the level control fill it. Then, wait until steam reaches working pressure before pressing. Finally, switch off the boiler at the end of the shift and follow the manual for draining.
Frequently Asked Questions About the Automatic Steam Boiler Iron System
Do I still need to refill water by hand?
No, not during normal use while the water supply stays connected. If the boiler runs low, check the water supply, feed line and level control first. Refill by hand only when the manual says to.
What water should I use in an automatic boiler?
Use clean water to reduce scale in the boiler and pump. Hard water builds up faster. Check the manual for the water quality it recommends.
Is this system a good fit for a small tailoring shop?
It suits shops that press for long hours and want less manual refilling. A small shop with light daily pressing may find a bottle iron simpler. Compare your pressing volume before you buy.
Why Buy the Automatic Steam Boiler Iron System from StitchPartner
StitchPartner ships pan-India and offers Cash on Delivery on eligible orders. Tell us your press count and water supply and we will help you confirm the right system.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The automatic steam boiler iron system feeds water to the boiler on its own. A pump and a water level control keep the boiler topped up during a shift. Use it when you press for long hours and do not want to refill a tank by hand.
How the Automatic Steam Boiler Iron System Works
A boiler turns water into steam for the iron. The water feed pump sends water to the boiler when the level drops. The level control stops the feed once the boiler reaches the set level.
Confirm These Details Before You Order
Check the pump type, boiler capacity and voltage on the label before you buy. Confirm your water supply and drain point suit the system. Match the setup to your press count and daily shift length.
How to Use the Automatic Steam Boiler Iron System
First, connect the water supply and check the feed line for leaks. Next, switch on the boiler and let the level control fill it. Then, wait until steam reaches working pressure before pressing. Finally, switch off the boiler at the end of the shift and follow the manual for draining.
Frequently Asked Questions About the Automatic Steam Boiler Iron System
Do I still need to refill water by hand?
No, not during normal use while the water supply stays connected. If the boiler runs low, check the water supply, feed line and level control first. Refill by hand only when the manual says to.
What water should I use in an automatic boiler?
Use clean water to reduce scale in the boiler and pump. Hard water builds up faster. Check the manual for the water quality it recommends.
Is this system a good fit for a small tailoring shop?
It suits shops that press for long hours and want less manual refilling. A small shop with light daily pressing may find a bottle iron simpler. Compare your pressing volume before you buy.
Why Buy the Automatic Steam Boiler Iron System from StitchPartner
StitchPartner ships pan-India and offers Cash on Delivery on eligible orders. Tell us your press count and water supply and we will help you confirm the right system.
