सिरुबा ओवरलॉक मशीन के लिए नीडल प्लेट E229 747K

The E229 needle plate is the genuine throat plate for the Siruba 747K overlock machine. It provides the needle and looper clearance holes beneath the presser foot and works with the machine’s feed dog and KM203 looper to form the overlock stitch.

के लिए सर्वश्रेष्ठ

Tailoring units and garment factories running Siruba 747K overlock seams, where a worn E229 plate causes skipped stitches or fabric snagging.

Why Replace This Plate

• Restores correct needle alignment for clean, skip-free overlock stitches
• Smooth surface prevents fabric snagging and thread fraying
• Matches the E229 hole pattern used on the 747K model
• Keeps stitch formation consistent when paired with a properly seated KM203 looper

मशीन अनुकूलता

विशेष विवरण

How to Replace the Needle Plate

Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the E229 plate with needle holes aligned squarely under the needle bar. Tighten evenly, rotate the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.

पूछे जाने वाले प्रश्न

What if stitches still skip after fitting this plate? Check the KM203 looper for wear or incorrect timing, since looper condition affects stitch formation as much as the plate.

Should I check the feed dog too? Yes — if fabric feeds unevenly, inspect the कुत्ते को खाना खिलाओ for worn teeth.

Does this fit other Siruba 700-series machines? It is made for the 747K; compare your machine’s existing plate against the E229 part number before ordering.