सिंगर/जुकी ज़िगज़ैग मशीन के लिए 503605/541647 नीडल प्लेट और फीड डॉग
Short Description
Genuine 503605/541647 needle plate and feed dog set for Singer/Juki zigzag machines. Matched fitment for smooth, even zigzag stitching.
₹550.00
यह 503605/541647 set combines the needle plate and feed dog for Singer and Juki zigzag sewing machines. Because both parts are sold together, they arrive correctly matched — the plate supplies the needle clearance hole while the feed dog’s teeth grip and advance the fabric on every stitch, so replacing them as a pair avoids the alignment mismatches that can happen when only one half is renewed.
के लिए सर्वश्रेष्ठ
Home sewing machines and small workshops running Singer or Juki zigzag models where the existing plate and feed dog are both worn, or where uneven zigzag stitching points to a mismatch between the two.
Why Replace Both Parts Together
- Restores correct needle alignment for clean zigzag stitch formation
- Fresh feed dog teeth grip fabric evenly, reducing slippage and puckering
- Matched plate-and-dog fitment avoids the height and timing mismatches that can occur when parts are sourced separately
- Reduces vibration that comes from a worn or loose-fitting plate
मशीन अनुकूलता
| ब्रांड | मशीन का प्रकार | Fitment |
|---|---|---|
| Singer / Juki | Zigzag | Models using the 503605/541647 needle plate and feed dog set |
विशेष विवरण
| भाग संख्याएँ | 503605 (needle plate) / 541647 (feed dog) |
|---|---|
| भाग प्रकार | Needle Plate + Feed Dog Set |
| Stitch Type | Zigzag |
| सामग्री | Hardened steel |
How to Fit This Plate and Feed Dog Set
Switch off the machine and remove the presser foot. Unscrew and lift out the old needle plate, then the old feed dog beneath it. Fit the new feed dog first, seating it so the teeth sit centred in the plate opening, then fit the new needle plate over it and tighten the screws evenly. Rotate the handwheel by hand to confirm the needle passes cleanly through the plate and the feed dog rises and falls without catching, then test-stitch on scrap fabric.
पूछे जाने वाले प्रश्न
Can I replace just the needle plate or just the feed dog? Yes, but if both parts show wear, replacing them together as this set keeps the fit between them correct from the start.
What causes zigzag stitches to look uneven even after this replacement? Check needle height and tension settings, since these also affect zigzag stitch width and balance.
Does this fit all Singer and Juki zigzag models? It fits models using the 503605/541647 part numbers; compare these against the numbers on your machine’s existing plate and feed dog before ordering.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
यह 503605/541647 set combines the needle plate and feed dog for Singer and Juki zigzag sewing machines. Because both parts are sold together, they arrive correctly matched — the plate supplies the needle clearance hole while the feed dog’s teeth grip and advance the fabric on every stitch, so replacing them as a pair avoids the alignment mismatches that can happen when only one half is renewed.
के लिए सर्वश्रेष्ठ
Home sewing machines and small workshops running Singer or Juki zigzag models where the existing plate and feed dog are both worn, or where uneven zigzag stitching points to a mismatch between the two.
Why Replace Both Parts Together
- Restores correct needle alignment for clean zigzag stitch formation
- Fresh feed dog teeth grip fabric evenly, reducing slippage and puckering
- Matched plate-and-dog fitment avoids the height and timing mismatches that can occur when parts are sourced separately
- Reduces vibration that comes from a worn or loose-fitting plate
मशीन अनुकूलता
| ब्रांड | मशीन का प्रकार | Fitment |
|---|---|---|
| Singer / Juki | Zigzag | Models using the 503605/541647 needle plate and feed dog set |
विशेष विवरण
| भाग संख्याएँ | 503605 (needle plate) / 541647 (feed dog) |
|---|---|
| भाग प्रकार | Needle Plate + Feed Dog Set |
| Stitch Type | Zigzag |
| सामग्री | Hardened steel |
How to Fit This Plate and Feed Dog Set
Switch off the machine and remove the presser foot. Unscrew and lift out the old needle plate, then the old feed dog beneath it. Fit the new feed dog first, seating it so the teeth sit centred in the plate opening, then fit the new needle plate over it and tighten the screws evenly. Rotate the handwheel by hand to confirm the needle passes cleanly through the plate and the feed dog rises and falls without catching, then test-stitch on scrap fabric.
पूछे जाने वाले प्रश्न
Can I replace just the needle plate or just the feed dog? Yes, but if both parts show wear, replacing them together as this set keeps the fit between them correct from the start.
What causes zigzag stitches to look uneven even after this replacement? Check needle height and tension settings, since these also affect zigzag stitch width and balance.
Does this fit all Singer and Juki zigzag models? It fits models using the 503605/541647 part numbers; compare these against the numbers on your machine’s existing plate and feed dog before ordering.
