937 Needle Plate for Feed-Off-the-Arm Sewing Machine
Short Description
937 needle plate for feed-off-the-arm machines. Fits Brother DA-9270/9280 and Jack JK-9270D-13. Pan-India delivery, COD available.
मूल कीमत थी: ₹999.00.₹650.00वर्तमान कीमत है: ₹650.00.
The 937 Needle Plate sits under the presser foot and guides the needles and fabric on feed-off-the-arm machines such as the Brother DA-9270 / DA-9280 and Jack JK-9270D-13. Best for factories and tailors whose old plate has scratched or burred needle holes that fray thread or snag fabric.
Part Details
| विवरण | Information |
|---|---|
| Part Name | 937 Needle Plate |
| Gauge | 937 (1/4-inch, 3-needle set) |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Thread frays or breaks near the needle holes.
- Fabric snags or shows scratch marks at the plate.
- The plate is dented after a needle strike.
How to Fit It
- First, switch off the machine and remove the presser foot.
- Next, unscrew and lift out the old needle plate.
- Then position the new plate so the feed dog slots line up and tighten the screws.
- Finally, turn the hand wheel by hand to confirm the needles pass cleanly through the holes.
पूछे जाने वाले प्रश्न
Is this needle plate matched to the 937 gauge?
Yes. It is meant for the 937 1/4-inch setup, so use it together with a 937 presser foot, needle clamp and feed dog. Mixing gauges causes needle strikes.
यह किन मशीनों के साथ संगत है?
It fits the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13 feed-off-the-arm machines. Check the old plate’s hole spacing before ordering.
Do you deliver with cash on delivery?
Yes. StitchPartner delivers pan-India with COD available on this part.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
स्टॉक में
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
स्टॉक में
इम्पोर्टेड मैग्नेटो मिनी पोर्टेबल बैग क्लोजर मशीन जीके-9 सीरीज
स्टॉक में
15 रंग के धागों वाला पोर्टेबल मिनी सिलाई किट बॉक्स
स्टॉक में
मेसर 125 मिमी कपड़ा काटने की मशीन | 350W हेवी ड्यूटी इलेक्ट्रिक फैब्रिक कटर | कपड़ा कटिंग मशीन
स्टॉक में
YS-4454 Button Holer Attachment for Sewing Machines
स्टॉक में
NRV 1/2 Inch Non-Return Valve for Steam Iron
स्टॉक में
18A/25A Contactor for Industrial Steam Iron Boiler
स्टॉक में
उत्पाद वर्णन
The 937 Needle Plate sits under the presser foot and guides the needles and fabric on feed-off-the-arm machines such as the Brother DA-9270 / DA-9280 and Jack JK-9270D-13. Best for factories and tailors whose old plate has scratched or burred needle holes that fray thread or snag fabric.
Part Details
| विवरण | Information |
|---|---|
| Part Name | 937 Needle Plate |
| Gauge | 937 (1/4-inch, 3-needle set) |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| मशीन का प्रकार | Feed-off-the-arm industrial machine |
When to Replace It
- Thread frays or breaks near the needle holes.
- Fabric snags or shows scratch marks at the plate.
- The plate is dented after a needle strike.
How to Fit It
- First, switch off the machine and remove the presser foot.
- Next, unscrew and lift out the old needle plate.
- Then position the new plate so the feed dog slots line up and tighten the screws.
- Finally, turn the hand wheel by hand to confirm the needles pass cleanly through the holes.
पूछे जाने वाले प्रश्न
Is this needle plate matched to the 937 gauge?
Yes. It is meant for the 937 1/4-inch setup, so use it together with a 937 presser foot, needle clamp and feed dog. Mixing gauges causes needle strikes.
यह किन मशीनों के साथ संगत है?
It fits the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13 feed-off-the-arm machines. Check the old plate’s hole spacing before ordering.
Do you deliver with cash on delivery?
Yes. StitchPartner delivers pan-India with COD available on this part.
