1/4 937 Needle Clamp for Feed-Off-the-Arm Machine
Short Description
1/4-inch 937 needle clamp for feed-off-the-arm machines. Fits Brother DA-9270/9280 and Jack JK-9270D-13. Pan-India delivery, COD available.
Original price was: ₹650.00.₹500.00Current price is: ₹500.00.
The 1/4 937 Needle Clamp holds the needles in position at the 1/4-inch gauge on feed-off-the-arm machines such as the Brother DA-9270 / DA-9280 and Jack JK-9270D-13. Best for garment factories and tailors running 3-needle lap-seam work whose old clamp no longer grips the needles square.
Part Details
| Detail | Information |
|---|---|
| Part Name | 1/4 937 Needle Clamp |
| Gauge | 1/4 inch (937 set) |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| Machine Type | Feed-off-the-arm industrial machine |
When to Replace It
- Needles slip or sit crooked after tightening.
- Stitch lines drift or needles strike the needle plate.
- You are fitting a fresh 937 gauge set and want the clamp to match.
How to Fit It
- First, switch off the machine and unplug it.
- Next, remove the needles and unscrew the old clamp from the needle bar.
- Then fit the new clamp and insert the needles fully before tightening.
- Finally, turn the hand wheel slowly to check the needles clear the needle plate.
FAQs
Which machines does this needle clamp fit?
It fits the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13 feed-off-the-arm machines, built for the 1/4-inch 937 gauge. Compare your old clamp with the gauge before ordering.
How do I know the needle clamp is worn?
If needles loosen between shifts or cannot be set square even with a new needle, the clamp seat is usually worn. Replacing it is cheaper than repeated needle breakage.
Can I order with cash on delivery?
Yes. StitchPartner delivers pan-India with COD available. Quote the part name when ordering so the correct gauge is dispatched.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
In stock
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
In stock
Imported Magneto Mini Portable Bag Closer Machine GK-9 Series
In stock
Portable Mini Sewing Kit Box with 15 Color Threads
In stock
MESSER 125mm Cloth Cutting Machine | 350W Heavy Duty Electric Fabric Cutter | कपड़ा कटिंग मशीन
In stock
YS-4454 Button Holer Attachment for Sewing Machines
In stock
NRV 1/2 Inch Non-Return Valve for Steam Iron
In stock
18A/25A Contactor for Industrial Steam Iron Boiler
In stock
Product Description
The 1/4 937 Needle Clamp holds the needles in position at the 1/4-inch gauge on feed-off-the-arm machines such as the Brother DA-9270 / DA-9280 and Jack JK-9270D-13. Best for garment factories and tailors running 3-needle lap-seam work whose old clamp no longer grips the needles square.
Part Details
| Detail | Information |
|---|---|
| Part Name | 1/4 937 Needle Clamp |
| Gauge | 1/4 inch (937 set) |
| Fits | Brother DA-9270, DA-9280; Jack JK-9270D-13 (JK-T9270 / T9280) |
| Machine Type | Feed-off-the-arm industrial machine |
When to Replace It
- Needles slip or sit crooked after tightening.
- Stitch lines drift or needles strike the needle plate.
- You are fitting a fresh 937 gauge set and want the clamp to match.
How to Fit It
- First, switch off the machine and unplug it.
- Next, remove the needles and unscrew the old clamp from the needle bar.
- Then fit the new clamp and insert the needles fully before tightening.
- Finally, turn the hand wheel slowly to check the needles clear the needle plate.
FAQs
Which machines does this needle clamp fit?
It fits the Brother DA-9270 and DA-9280 and the Jack JK-9270D-13 feed-off-the-arm machines, built for the 1/4-inch 937 gauge. Compare your old clamp with the gauge before ordering.
How do I know the needle clamp is worn?
If needles loosen between shifts or cannot be set square even with a new needle, the clamp seat is usually worn. Replacing it is cheaper than repeated needle breakage.
Can I order with cash on delivery?
Yes. StitchPartner delivers pan-India with COD available. Quote the part name when ordering so the correct gauge is dispatched.
