Product Description
Replace a worn, bent or damaged base sheet metal clamp with this Cupid 110mm sheet metal clamp, designed specifically for compatible Cupid 110mm and 110mm Super Turbo cloth cutting machines.
This sheet metal guard clamp is fitted around the lower base area of the machine near the rotating cutting blade. It helps maintain the correct position of the base plate and provides the required clearance around the blade during fabric cutting.
A damaged or incorrectly positioned clamp can affect blade clearance, fabric movement and the stability of the lower blade plate. Replacing the original component can help restore the correct base assembly when the remaining parts are in good condition.
Pack Quantity: 1 Piece
Important: This product is intended for compatible Cupid 110mm machines. Please compare the shape, mounting holes and dimensions of your existing sheet metal clamp before purchasing.
What Is a Sheet Metal Clamp on a Cloth Cutting Machine?
The sheet metal clamp is a small but important component of the lower base assembly. It is positioned near the blade and helps secure the sheet metal/base plate arrangement around the cutting mechanism.
Its position allows fabric to move toward the cutting blade while maintaining the required clearance between the fabric, base plate and rotating blade.
If the original clamp becomes bent, damaged or loose, it may interfere with normal fabric movement or blade clearance.
Key Features
- Replacement sheet metal clamp for Cupid 110mm cloth cutting machines
- Compatible with Cupid 110mm
- Compatible with Cupid 110mm Super Turbo
- Designed for compatible round and octagonal blade cutters
- Helps maintain blade clearance
- Supports proper lower base plate positioning
- Smooth metal surface helps reduce fabric snagging
- Useful for machine repair and maintenance
- Pack Quantity: 1 Piece
CUPID MACHINE COMPATIBILITY
| Machine | Compatibility |
|---|---|
| Cupid 110mm | Yes |
| Cupid 110mm Super Turbo | Yes |
| Other Cupid models | Verify before purchase |
Cupid 110mm Cloth Cutting Machine
This sheet metal clamp is designed for the Cupid 110mm cloth cutting machine. It is suitable as a replacement when the original clamp becomes bent, worn or damaged.
If you are servicing a Cupid 110mm cloth cutting machine, compare the existing clamp’s mounting holes, shape and position before ordering.
Cupid 110mm Super Turbo
The clamp is also compatible with the Cupid 110mm Super Turbo configuration.
It fits into the lower base assembly near the cutting blade and helps maintain the required positioning around the blade area.
WHY IS THE SHEET METAL CLAMP IMPORTANT?
The lower sheet metal components work close to the rotating blade, so correct positioning is important.
A properly fitted clamp helps:
- Maintain the intended blade clearance
- Keep the lower base assembly secure
- Provide a smooth path for fabric movement
- Reduce the chance of fabric catching on a damaged metal edge
- Support consistent machine operation
- Maintain the correct position of the base plate components
The clamp is only one part of the cutting assembly. Blade condition, base plate alignment and other components should also be checked during servicing.
The sheet metal clamp itself does not determine cutting capacity. The machine’s blade size, motor power, blade condition and fabric thickness determine the actual cutting performance.
SUITABLE FOR
This replacement part is useful for:
- Tailors
- Garment factories
- Textile workshops
- Fabric cutting operators
- Boutique production units
- Upholstery workers
- Leather workers
- Garment machinery technicians
- Cloth cutting machine repair shops
It is particularly useful when the machine is operating normally but the original sheet metal clamp is bent, damaged or missing.
SIGNS YOUR SHEET METAL CLAMP NEEDS REPLACEMENT
Inspect the clamp if you notice:
- Bent or distorted metal
- Loose mounting
- Damaged screw holes
- Incorrect blade clearance
- Fabric catching near the base
- A loose lower base plate
- Visible rubbing around the blade area
- Unusual movement of the sheet metal assembly
If the blade itself is contacting the clamp, stop using the machine and check the complete base and blade assembly before continuing.
HOW TO REPLACE THE SHEET METAL CLAMP
- Disconnect the Cupid cloth cutting machine from the power supply.
- Place the machine securely on a suitable work surface.
- Locate the sheet metal clamp near the lower blade/base assembly.
- Remove the screws or fixing hardware securing the original clamp.
- Remove the damaged or bent sheet metal component.
- Compare the replacement with the original part.
- Align the mounting holes correctly.
- Install and tighten the fixing screws.
- Check the clearance around the rotating blade manually.
- Make sure the clamp does not interfere with the blade or fabric path.
- Test the machine carefully before returning to normal cutting operation.
If the replacement does not align correctly, do not force the mounting holes or modify the part without confirming compatibility.
FREQUENTLY ASKED QUESTIONS
Is this sheet metal clamp compatible with Cupid 110mm?
Yes. This sheet metal clamp is designed for the Cupid 110mm cloth cutting machine. It is used around the lower base and blade area to maintain the correct component positioning.
Does this clamp fit Cupid 110mm Super Turbo?
Yes. It is compatible with the Cupid 110mm Super Turbo configuration. Compare the existing clamp and mounting holes before installation.
Is this sheet metal clamp compatible with Lejiang machines?
No. This particular product is intended for compatible Cupid 110mm machines and should not be advertised as a Lejiang-compatible part.
Does this clamp fit Taking TK-110?
No. This product is specifically intended for the specified Cupid 110mm configurations.
Is this compatible with Messer 110mm cutters?
No. This sheet metal clamp should be used only with compatible Cupid 110mm machines.
What does the sheet metal clamp do?
The clamp forms part of the lower base assembly near the cutting blade. It helps secure the sheet metal components and maintain the intended clearance and positioning around the blade.
Can a bent clamp affect fabric cutting?
Yes. A bent or incorrectly positioned clamp can interfere with fabric movement or alter the clearance around the blade. Inspect the clamp and surrounding base components if fabric begins catching near the lower blade area.
Can this part be used for multi-layer fabric cutting?
Yes. It can be used in compatible Cupid 110mm machines used for multi-layer fabric cutting. The machine’s motor and blade determine the actual cutting capacity.
How many pieces are included?
The package contains 1 sheet metal clamp.
What should I check before purchasing?
Confirm that your machine is a compatible Cupid 110mm or Cupid 110mm Super Turbo model. Compare the existing part’s shape, screw-hole position and dimensions before purchasing.
