Display with Button for Jack JK-9100BS/JK-9100BP Machine
Short Description
Replacement display with button for Jack JK-9100BS / JK-9100BP direct-drive machines. ₹350, COD available, ships across India.
₹350.00
Display with button for Jack JK-9100BS and JK-9100BP single needle direct-drive lockstitch machines. This front panel shows machine settings and function status, so replace it when the screen is cracked, blank or the button no longer responds.
Fits
- Jack JK-9100BS
- Jack JK-9100BP
When to Replace It
- The screen is cracked, dim or completely blank.
- Characters look garbled or segments are missing.
- The button does not respond when pressed.
How to Replace the Display
- First, switch the machine off and unplug it.
- Next, open the panel cover and note how the display cable is connected, so the new one goes back the same way.
- Then disconnect the old display and fit the new one with its button in the same position.
- Finally, close the cover, power on and check that the settings show clearly.
FAQ
How do I confirm this display fits my machine?
Check the model plate on the machine arm: it should read JK-9100BS or JK-9100BP. If your machine shows a different model, message us before ordering so we can match the right panel.
My screen is blank. Is the display always the problem?
Not always. A loose display cable can look the same as a failed panel. With the power off, reseat the cable first; if the screen stays blank or garbled after that, the display itself is the likely fault.
More parts for this model: Jack 9100 / 9100BP / 9100BS spare parts.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
In stock
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
In stock
Imported Magneto Mini Portable Bag Closer Machine GK-9 Series
In stock
Portable Mini Sewing Kit Box with 15 Color Threads
In stock
MESSER 125mm Cloth Cutting Machine | 350W Heavy Duty Electric Fabric Cutter | कपड़ा कटिंग मशीन
In stock
YS-4454 Button Holer Attachment for Sewing Machines
In stock
NRV 1/2 Inch Non-Return Valve for Steam Iron
In stock
18A/25A Contactor for Industrial Steam Iron Boiler
In stock
Product Description
Display with button for Jack JK-9100BS and JK-9100BP single needle direct-drive lockstitch machines. This front panel shows machine settings and function status, so replace it when the screen is cracked, blank or the button no longer responds.
Fits
- Jack JK-9100BS
- Jack JK-9100BP
When to Replace It
- The screen is cracked, dim or completely blank.
- Characters look garbled or segments are missing.
- The button does not respond when pressed.
How to Replace the Display
- First, switch the machine off and unplug it.
- Next, open the panel cover and note how the display cable is connected, so the new one goes back the same way.
- Then disconnect the old display and fit the new one with its button in the same position.
- Finally, close the cover, power on and check that the settings show clearly.
FAQ
How do I confirm this display fits my machine?
Check the model plate on the machine arm: it should read JK-9100BS or JK-9100BP. If your machine shows a different model, message us before ordering so we can match the right panel.
My screen is blank. Is the display always the problem?
Not always. A loose display cable can look the same as a failed panel. With the power off, reseat the cable first; if the screen stays blank or garbled after that, the display itself is the likely fault.
More parts for this model: Jack 9100 / 9100BP / 9100BS spare parts.
