A11 Swing Hemmer Folder / Binder for Single Needle Lock Stitch Machine
Short Description
₹850.00
The A11 swing hemmer folder / binder is a hemming attachment for single needle lock stitch machines. It folds the fabric edge and feeds it under the needle, so shirt bottoms and similar hems come out narrow, even and consistent. Best for: garment factories, boutiques and tailoring shops hemming light to medium fabrics on a standard lock stitch machine.
What the A11 Swing Hemmer Folder Does
Also sold as a shirt bottom hem folder or hemming folder, the A11 turns the raw edge of the fabric and guides it into the stitch line. The operator only has to feed the fabric, which removes manual folding, pinning and pressing from repeat hemming work.
- Turns and stitches the hem in a single pass
- Keeps the hem width uniform along the full length of the garment
- Fits standard single needle lock stitch machines
- Reduces uneven hems and rework on repeat orders
Where It Is Used
The A11 hemmer folder is used for shirt bottoms, kurta and tunic hems, uniform and nightwear hems, and the edges of linen and curtain pieces. It suits production lines and small tailoring units that hem the same width again and again.
Benefits for Tailors and Factories
- Speed: one pass replaces fold, press and stitch as separate steps.
- Consistency: every piece gets the same hem width, which matters on bulk orders.
- Easy for new operators: the fabric is guided by the folder, so less skill is needed to get a clean hem.
Machine Compatibility
| Machine type | Suitable |
|---|---|
| Single needle lock stitch (flat bed) | Yes |
| Interlock / flatlock machines | No. Use an F-series folder such as the F401 right angle binder |
If you are unsure about your machine model, message us before ordering and we will confirm the fit.
How the A11 Compares to Other Folders
| Folder | What it does | Choose it when |
|---|---|---|
| A11 swing hemmer folder / binder | Folds and stitches a plain hem | You hem shirts, kurtas and general garment edges |
| KL93/DY602 round hemming folder | Round hemming folder in 3mm to 10mm sizes | You need a specific narrow hem width on shirt bottoms |
| A10 right angle bias binder | Binds and pipes an edge with a separate strip | You are binding or piping, not hemming |
Specifications
| Product | A11 swing hemmer folder / binder |
| Also called | Shirt bottom hem folder, hemming folder |
| Machine | Single needle lock stitch machine |
| Application | Hemming shirt bottoms and garment edges |
| Category | Folders and attachments |
| Delivery | Pan-India, COD available |
How to Use the A11 Hemmer Folder
- First, fit the folder in place of the standard presser foot on your single needle machine and tighten it securely.
- Next, insert the raw edge of the fabric into the folder scroll so it turns under cleanly.
- Then lower the presser foot and start sewing, letting the folder guide the edge without pulling the fabric.
- Finally, check the hem width on a scrap piece first and adjust the fabric position before starting the full garment.
Frequently Asked Questions
What is a swing hemmer folder used for?
A swing hemmer folder is a sewing machine attachment that folds the raw edge of fabric and guides it under the needle, so a hem is turned and stitched in one pass. Tailors and garment factories use it for shirt bottoms and other straight hems that must stay the same width on every piece.
Which machines does the A11 hemmer folder fit?
The A11 is made for single needle lock stitch machines. It is not meant for interlock, overlock or flatlock machines, which use different folders. If you are unsure about your model, send us the machine name and we will confirm before you order.
What is the difference between the A11 and the KL93 round hemming folder?
The A11 is a general hemmer folder / binder for plain hems, while the KL93/DY602 is a round hemming folder sold in 3mm to 10mm sizes for a specific narrow hem width. Choose the KL93 when you need an exact hem size, and the A11 for general hemming.
Do you deliver the A11 swing hemmer folder across India with COD?
Yes. StitchPartner ships the A11 swing hemmer folder across India and offers cash on delivery, so boutique owners, tailors and garment units can order a single piece without paying in advance.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
In stock
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
In stock
Imported Magneto Mini Portable Bag Closer Machine GK-9 Series
In stock
Portable Mini Sewing Kit Box with 15 Color Threads
In stock
MESSER 125mm Cloth Cutting Machine | 350W Heavy Duty Electric Fabric Cutter | कपड़ा कटिंग मशीन
In stock
YS-4454 Button Holer Attachment for Sewing Machines
In stock
NRV 1/2 Inch Non-Return Valve for Steam Iron
In stock
18A/25A Contactor for Industrial Steam Iron Boiler
In stock
Product Description
The A11 swing hemmer folder / binder is a hemming attachment for single needle lock stitch machines. It folds the fabric edge and feeds it under the needle, so shirt bottoms and similar hems come out narrow, even and consistent. Best for: garment factories, boutiques and tailoring shops hemming light to medium fabrics on a standard lock stitch machine.
What the A11 Swing Hemmer Folder Does
Also sold as a shirt bottom hem folder or hemming folder, the A11 turns the raw edge of the fabric and guides it into the stitch line. The operator only has to feed the fabric, which removes manual folding, pinning and pressing from repeat hemming work.
- Turns and stitches the hem in a single pass
- Keeps the hem width uniform along the full length of the garment
- Fits standard single needle lock stitch machines
- Reduces uneven hems and rework on repeat orders
Where It Is Used
The A11 hemmer folder is used for shirt bottoms, kurta and tunic hems, uniform and nightwear hems, and the edges of linen and curtain pieces. It suits production lines and small tailoring units that hem the same width again and again.
Benefits for Tailors and Factories
- Speed: one pass replaces fold, press and stitch as separate steps.
- Consistency: every piece gets the same hem width, which matters on bulk orders.
- Easy for new operators: the fabric is guided by the folder, so less skill is needed to get a clean hem.
Machine Compatibility
| Machine type | Suitable |
|---|---|
| Single needle lock stitch (flat bed) | Yes |
| Interlock / flatlock machines | No. Use an F-series folder such as the F401 right angle binder |
If you are unsure about your machine model, message us before ordering and we will confirm the fit.
How the A11 Compares to Other Folders
| Folder | What it does | Choose it when |
|---|---|---|
| A11 swing hemmer folder / binder | Folds and stitches a plain hem | You hem shirts, kurtas and general garment edges |
| KL93/DY602 round hemming folder | Round hemming folder in 3mm to 10mm sizes | You need a specific narrow hem width on shirt bottoms |
| A10 right angle bias binder | Binds and pipes an edge with a separate strip | You are binding or piping, not hemming |
Specifications
| Product | A11 swing hemmer folder / binder |
| Also called | Shirt bottom hem folder, hemming folder |
| Machine | Single needle lock stitch machine |
| Application | Hemming shirt bottoms and garment edges |
| Category | Folders and attachments |
| Delivery | Pan-India, COD available |
How to Use the A11 Hemmer Folder
- First, fit the folder in place of the standard presser foot on your single needle machine and tighten it securely.
- Next, insert the raw edge of the fabric into the folder scroll so it turns under cleanly.
- Then lower the presser foot and start sewing, letting the folder guide the edge without pulling the fabric.
- Finally, check the hem width on a scrap piece first and adjust the fabric position before starting the full garment.
Frequently Asked Questions
What is a swing hemmer folder used for?
A swing hemmer folder is a sewing machine attachment that folds the raw edge of fabric and guides it under the needle, so a hem is turned and stitched in one pass. Tailors and garment factories use it for shirt bottoms and other straight hems that must stay the same width on every piece.
Which machines does the A11 hemmer folder fit?
The A11 is made for single needle lock stitch machines. It is not meant for interlock, overlock or flatlock machines, which use different folders. If you are unsure about your model, send us the machine name and we will confirm before you order.
What is the difference between the A11 and the KL93 round hemming folder?
The A11 is a general hemmer folder / binder for plain hems, while the KL93/DY602 is a round hemming folder sold in 3mm to 10mm sizes for a specific narrow hem width. Choose the KL93 when you need an exact hem size, and the A11 for general hemming.
Do you deliver the A11 swing hemmer folder across India with COD?
Yes. StitchPartner ships the A11 swing hemmer folder across India and offers cash on delivery, so boutique owners, tailors and garment units can order a single piece without paying in advance.
