DB-P05-002-16 Digital LED Control Panel PCB

The DB-P05-002-16 Digital LED Control Panel PCB gives compatible direct-drive industrial sewing machines and commercial electronic equipment a compact display and control interface. The 2-digit LED display shows operating values, settings, status information, and fault codes, while the two tactile buttons let you adjust supported parameters quickly.

The PCB includes a 7-pin wire harness that connects the display panel to the compatible main control board. Its slim vertical design fits machine panels, compact housings, and external control boxes where installation space is limited.

प्रमुख विशेषताऐं

• 2-digit 7-segment LED display shows numeric values, settings, status modes, and fault codes
• S1 and S2 tactile buttons provide quick parameter adjustments
• 7-pin wire harness connects the display PCB to the compatible control system
• Compact vertical PCB design fits narrow machine panels and control housings
• Industrial-grade electronic components support regular machine operation
• Part Number: DB-P05-002-16
• Related PCB Series: DB-P05-002-12
• पैक मात्रा: 1 टुकड़ा

मशीन अनुकूलता

The DB-P05-002-16 control panel PCB fits compatible direct-drive industrial sewing machines, including जैक एफ4 और Jack E3 series models that use the matching display module.

It also suits equivalent direct-drive lockstitch and overlock machines when the existing display PCB matches the same part number, connector arrangement, wire configuration, and physical design.

Please verify the shape, connector configuration, part number, wire count, and measurements of your existing PCB before purchasing.

How Does the LED Display Work?

The 2-digit LED display gives you a clear view of information from the connected electronic control system. Depending on the machine or equipment, the display may show operating speed, parameter values, status modes, or error codes.

The S1 and S2 buttons let you increase, decrease, or navigate through supported settings.

7-Pin Wire Harness

शामिल 7-pin wire harness connects the display PCB with the compatible main control board. The pre-attached harness makes replacement easier when your original display uses the same connector and wiring arrangement.

Always switch off and disconnect the equipment before replacing the PCB. Match the connector and wire arrangement carefully before restoring power.

उपयुक्त अनुप्रयोग

This display PCB supports compatible electronic control systems used in:

• Direct-drive industrial lockstitch sewing machines
• Compatible industrial overlock sewing machines
• Jack F4 series machines with the matching display module
• Jack E3 series machines with the matching display module
• Equivalent electronic sewing machine control systems
• Compatible commercial control boxes and electronic equipment

For sewing applications, the PCB manages the machine’s electronic display interface rather than contacting the fabric. The connected sewing machine can handle materials such as cotton, polyester, denim, canvas, and other fabrics according to its own mechanical specifications.

इंस्टालेशन गाइड

1. Switch off the machine and disconnect the power supply.
2. Remove the existing display panel or sub-PCB carefully.
3. Compare the old PCB with the replacement unit.
4. Check the PCB number, button positions, connector, and wire arrangement.
5. Connect the 7-pin harness to the compatible control board.
6. Secure the PCB in its original mounting position.
7. Restore power and test the display and buttons.

Please verify the shape, connector configuration, part number, and measurements of your existing PCB before purchasing.