Jack E3 Overlock Display Board 9950008400

Jack E3 Overlock Display Board 9950008400

The Jack E3 overlock display board 9950008400 helps you monitor machine settings and adjust operating parameters on compatible industrial overlock sewing machines. It supports the जैक E3 Old Version Series और चयनित Bruce overlock machines that use the ZB52-T64 panel architecture.

The electronic display panel uses a dual 7-segment LED display to show operating information, speed settings and system error codes. The S1 and S2 buttons let you navigate parameters and adjust settings during machine operation.

The package includes 1 display panel PCB unit with a pre-wired multi-pin ribbon cable assembly.

Why Choose This Overlock Display Panel?

A damaged display panel can make it difficult to check machine settings or identify error codes. This replacement PCB gives you a dedicated display and button interface for compatible overlock machine systems.

The dual LED display provides clear visual information, while the S1/S2 buttons make parameter adjustment convenient. The supplied ribbon cable also simplifies the connection when you replace a matching original panel.

The surface-mount electronic components support reliable operation in the vibration environment of industrial sewing machines.

प्रमुख विशेषताऐं

• Dual 7-segment LED digital display
• S1/S2 push-button controls
• Speed and parameter adjustment
• System error-code display
• Pre-wired multi-pin ribbon cable
• Surface-mount electronic PCB components
• Part numbers: 9950008400 / 513563 / P61558N2
• PCB identification: ZB52-T64-V1.1
• पैकेज मात्रा: 1 टुकड़ा
• Designed for compatible Jack E3 Old Version applications

मशीन अनुकूलता

This display board works with selected industrial overlock sewing machines that match the specified panel architecture.

Always compare your existing PCB before ordering. Check the part number, connector arrangement, button layout and PCB identification to confirm compatibility.

If your existing board does not match the listed specifications, please verify the shape and measurements of your existing part before purchasing.

सर्वोत्तम प्रकार के कपड़े

The display board does not determine fabric compatibility by itself. Your overlock machine, needle, thread and machine settings determine the fabrics you can sew.

Compatible overlock machines can handle various garment fabrics, including:

• कपास: Suitable for shirts, uniforms and general garment production.
• पॉलिएस्टर: Common for synthetic garments and apparel production.
• Silk: Suitable for fine-fabric overlocking when the machine setup supports it.
• Knits: Useful for garment edges and seam finishing.
• डेनिम: Suitable when the specific overlock machine supports heavier fabric applications.

How To Replace the Display Board

1. सिलाई मशीन को बंद कर दें और बिजली की आपूर्ति काट दें।.
2. Open the display-panel housing according to the machine’s service procedure.
3. Compare the existing PCB with the replacement board, including the part number and connector layout.
4. Disconnect the existing ribbon cable carefully from the PCB connector.
5. Position the replacement display board correctly inside the machine housing.
6. Connect the ribbon cable securely to the matching connector.
7. Close the panel housing and restore the machine’s power.
8. Test the LED display and buttons to confirm proper operation.

If you do not have experience working with industrial sewing-machine electronics, ask a qualified technician to handle the replacement.

अक्सर पूछे जाने वाले प्रश्नों

What is Jack overlock display board part number 9950008400?

9950008400 identifies a display panel PCB used with specified Jack E3 Old Version overlock systems. The board provides the LED display and button interface for machine parameters and error information. The same product may also carry identification numbers such as 513563, P61558N2 and ZB52-T64-V1.1.

Is this display board compatible with Jack E3?

Yes, this board supports the Jack E3 Old Version Series. The listed part numbers include 9950008400, 513563 and P61558N2. Compare your original PCB, connector and panel layout before ordering to make sure your machine uses the same display system.

Can this PCB work with a Bruce overlock machine?

Yes, it can work with compatible Bruce overlock machines that use the specified ZB52-T64 panel architecture. Check the original PCB number and connector arrangement because Bruce machines can use different electronic components across different versions.

What does the dual LED display show?

The dual 7-segment LED display shows machine operating information and parameter values. It can also display system error codes when the connected machine control system sends that information to the panel.

Does this board control the sewing machine motor?

No, the display board primarily provides the display and user-control interface. It communicates with the machine’s electronic control system through its connected wiring. Do not use this PCB as a replacement for a separate motor-control or main control board.

Does this fit every Jack overlock machine?

नहीं।. This PCB targets specific Jack E3 Old Version applications and compatible machines that use the listed panel architecture. Check your existing PCB part number and connector configuration before purchasing.

Does the package include the ribbon cable?

Yes, the product specification includes a pre-wired multi-pin ribbon cable assembly. Compare the supplied connector with your existing machine connection before installation.

Can I replace the display PCB myself?

Yes, an experienced sewing-machine technician or electronics professional can replace the PCB. Always disconnect the machine from electrical power before opening the panel housing. Get professional assistance if you are unsure about the wiring or electronic connections.