580C1-85 Switch for Straight Knife Cutting Machine
Short Description
Single-speed 3-phase switch for straight knife cutting machines. OEM-spec fit, budget-friendly factory spare. COD available across India, ships fast.
₹100.00
Best For
The 580C1-85 switch is a single-speed, 3-phase control switch built for straight knife cloth cutting machines (5″/6″/8″/10″/12″ blade range) that run continuously through long cutting shifts in a garment factory cutting room. It’s the direct replacement to reach for when a cutter’s motor switch has burned out, cracked, or stopped making reliable contact.
What It Does
- Controls single-speed 3-phase motor start/stop on straight knife cutting machines
- OEM-spec fit — no drilling or panel modification needed on compatible cutters
- Rated for the continuous-duty cycling a cutting room puts a switch through in an 8–10 hour shift
Use Cases
Garment factories and cutting rooms running 3-phase straight knife cutters (5″/6″/8″/10″/12″ blade sizes) use this switch as a stock spare so a worn-out control switch doesn’t stop a cutting line mid-shift.
Benefits
A failing motor switch is one of the more common reasons a straight knife cutter goes down on the factory floor — intermittent contact makes the motor cut out mid-cut, which is both a productivity problem and, with a knife blade involved, a safety one. Keeping this switch in stock as a spare means a cutting room can swap it in minutes rather than waiting on a service call.
Specs
| Spec | Detail |
|---|---|
| Part | 580C1-85 Switch |
| Speed | Single speed |
| Phase | 3-phase |
| Machine type | Straight knife cloth cutting machine (5″/6″/8″/10″/12″) |
| Fit | OEM-spec direct replacement |
How to Use
First, disconnect the cutting machine from its power source before opening the switch housing. Next, remove the old switch, noting the wire positions or photographing them before disconnecting. Then, connect the 580C1-85 in the same wire configuration and secure it in the housing. Finally, restore power and test the switch through a full start/stop cycle before returning the machine to production.
FAQ
Buyer Intent
Q: Will the 580C1-85 fit any straight knife cutting machine, or only specific brands?
It’s built to the standard 3-phase single-speed switch footprint used across most straight knife cutting machines in the 5″–12″ blade range, but wiring configurations vary by manufacturer. Confirm your machine is single-speed 3-phase (not 2-speed) before ordering, since 2-speed cutters use a different switch.
Q: Is this an original manufacturer part or a compatible replacement?
This is a compatible OEM-spec replacement, not a part sourced from the original cutter manufacturer — it’s built to match the original’s electrical rating and mounting footprint. It’s sold as a factory-floor spare, not a branded original.
Compatibility
Q: How do I know if my cutter needs a single-speed or 2-speed switch?
Check your existing switch: a single-speed switch has one on position, while a 2-speed switch has two distinct speed settings marked on the dial or toggle. Ordering the wrong type won’t fit the wiring harness correctly.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
In stock
PIN 696 Electric Scissors – Cordless Rechargeable Fabric Cutter
In stock
Imported Magneto Mini Portable Bag Closer Machine GK-9 Series
In stock
Portable Mini Sewing Kit Box with 15 Color Threads
In stock
MESSER 125mm Cloth Cutting Machine | 350W Heavy Duty Electric Fabric Cutter | कपड़ा कटिंग मशीन
In stock
YS-4454 Button Holer Attachment for Sewing Machines
In stock
NRV 1/2 Inch Non-Return Valve for Steam Iron
In stock
18A/25A Contactor for Industrial Steam Iron Boiler
In stock
Product Description
Best For
The 580C1-85 switch is a single-speed, 3-phase control switch built for straight knife cloth cutting machines (5″/6″/8″/10″/12″ blade range) that run continuously through long cutting shifts in a garment factory cutting room. It’s the direct replacement to reach for when a cutter’s motor switch has burned out, cracked, or stopped making reliable contact.
What It Does
- Controls single-speed 3-phase motor start/stop on straight knife cutting machines
- OEM-spec fit — no drilling or panel modification needed on compatible cutters
- Rated for the continuous-duty cycling a cutting room puts a switch through in an 8–10 hour shift
Use Cases
Garment factories and cutting rooms running 3-phase straight knife cutters (5″/6″/8″/10″/12″ blade sizes) use this switch as a stock spare so a worn-out control switch doesn’t stop a cutting line mid-shift.
Benefits
A failing motor switch is one of the more common reasons a straight knife cutter goes down on the factory floor — intermittent contact makes the motor cut out mid-cut, which is both a productivity problem and, with a knife blade involved, a safety one. Keeping this switch in stock as a spare means a cutting room can swap it in minutes rather than waiting on a service call.
Specs
| Spec | Detail |
|---|---|
| Part | 580C1-85 Switch |
| Speed | Single speed |
| Phase | 3-phase |
| Machine type | Straight knife cloth cutting machine (5″/6″/8″/10″/12″) |
| Fit | OEM-spec direct replacement |
How to Use
First, disconnect the cutting machine from its power source before opening the switch housing. Next, remove the old switch, noting the wire positions or photographing them before disconnecting. Then, connect the 580C1-85 in the same wire configuration and secure it in the housing. Finally, restore power and test the switch through a full start/stop cycle before returning the machine to production.
FAQ
Buyer Intent
Q: Will the 580C1-85 fit any straight knife cutting machine, or only specific brands?
It’s built to the standard 3-phase single-speed switch footprint used across most straight knife cutting machines in the 5″–12″ blade range, but wiring configurations vary by manufacturer. Confirm your machine is single-speed 3-phase (not 2-speed) before ordering, since 2-speed cutters use a different switch.
Q: Is this an original manufacturer part or a compatible replacement?
This is a compatible OEM-spec replacement, not a part sourced from the original cutter manufacturer — it’s built to match the original’s electrical rating and mounting footprint. It’s sold as a factory-floor spare, not a branded original.
Compatibility
Q: How do I know if my cutter needs a single-speed or 2-speed switch?
Check your existing switch: a single-speed switch has one on position, while a 2-speed switch has two distinct speed settings marked on the dial or toggle. Ordering the wrong type won’t fit the wiring harness correctly.
