Sewing Machine Motor & Foot Pedal Set 220V 100W

This 220V 100W motor and foot pedal set is for household and light domestic sewing machines — straight-stitch machines like Singer, Usha, and similar imported or domestic models. It’s a complete kit: motor, foot pedal, belt, and mounting bracket, so you’re not sourcing each part separately.

A Complete Kit for Household Machines

100W is a light-duty rating built for household sewing, not industrial-volume stitching — enough power for regular home tailoring, alterations, and hobby sewing on a straight-stitch machine. The set includes the motor, foot pedal with speed control, drive belt, and mounting bracket, covering what you need to get a machine running again after the original motor or pedal fails.

Key Details

• 220V, 100W motor — suited to household and light domestic use
• Complete set: motor, foot pedal, belt, and mounting bracket included
• Foot pedal controls stitching speed, same as the original setup on most home machines
• Fits standard household sewing machine mounting points

Who Needs This

Home sewers and small tailoring setups whose household machine’s original motor, pedal, or belt has worn out or stopped working. Also useful if you’ve picked up a secondhand machine missing its motor set.

How to Install

First, unplug the machine and remove the old motor, pedal, and belt if replacing a full setup. Next, mount the new motor bracket in the same position as the original. Then, fit the belt between the motor pulley and the handwheel, and connect the foot pedal. Finally, plug in and test at a low pedal pressure before sewing normally.

Frequently Asked Questions

Will this fit my household sewing machine?

It fits standard household straight-stitch machines using a belt-driven motor with a foot pedal — the same setup used on most domestic Singer, Usha, and similar machines. If your machine uses a different mounting style, check your existing motor’s bracket before ordering.

Is 100W enough for regular tailoring work?

Yes, for home sewing, alterations, and hobby use. 100W is a household-grade rating — it’s not meant for continuous industrial-volume stitching, where machines typically use 250W+ motors.

Does this include the belt and mounting bracket, or just the motor?

The full set includes the motor, foot pedal, belt, and mounting bracket — everything needed to fit a working motor setup onto your machine.

Can I use this to replace a noisy or slow old motor?

Yes, a full motor and pedal replacement is a common fix when the original motor has worn bearings or the pedal’s speed control has become inconsistent.