Needle Plate E229 747K Siruba Overlock Machine
Short Description
Genuine E229 needle plate for the Siruba 747K overlock machine. Pairs with the KM203 looper for consistent stitch formation.
₹250.00
The E229 needle plate is the genuine throat plate for the Siruba 747K overlock machine. It provides the needle and looper clearance holes beneath the presser foot and works with the machine’s feed dog and KM203 looper to form the overlock stitch.
Best For
Tailoring units and garment factories running Siruba 747K overlock seams, where a worn E229 plate causes skipped stitches or fabric snagging.
Why Replace This Plate
- Restores correct needle alignment for clean, skip-free overlock stitches
- Smooth surface prevents fabric snagging and thread fraying
- Matches the E229 hole pattern used on the 747K model
- Keeps stitch formation consistent when paired with a properly seated KM203 looper
Machine Compatibility
| Brand | Machine Type | Model |
|---|---|---|
| Siruba | Overlock | 747K (E229 needle plate) |
Specifications
| Part Number | E229 |
|---|---|
| Part Type | Needle Plate (Sui Plate) |
| Machine Model | Siruba 747K |
| Matching Looper | KM203 |
How to Replace the Needle Plate
Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the E229 plate with needle holes aligned squarely under the needle bar. Tighten evenly, rotate the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.
FAQs
What if stitches still skip after fitting this plate? Check the KM203 looper for wear or incorrect timing, since looper condition affects stitch formation as much as the plate.
Should I check the feed dog too? Yes — if fabric feeds unevenly, inspect the feed dog for worn teeth.
Does this fit other Siruba 700-series machines? It is made for the 747K; compare your machine’s existing plate against the E229 part number before ordering.
YDL Professional Cloth Cutting Scissors 10, 11, 12 Inch – Tailor Scissors
In stock
PIN 696A Electric Scissors – Cordless Rechargeable Fabric Cutter
In stock
Imported Magneto Mini Portable Bag Closer Machine GK-9 Series
In stock
Portable Mini Sewing Kit Box with 15 Color Threads
In stock
MESSER 125mm Cloth Cutting Machine | 350W Heavy Duty Electric Fabric Cutter | कपड़ा कटिंग मशीन
In stock
YS-4454 Button Holer Attachment for Sewing Machines
In stock
NRV 1/2 Inch Non-Return Valve for Steam Iron
In stock
18A/25A Contactor for Industrial Steam Iron Boiler
In stock
Product Description
The E229 needle plate is the genuine throat plate for the Siruba 747K overlock machine. It provides the needle and looper clearance holes beneath the presser foot and works with the machine’s feed dog and KM203 looper to form the overlock stitch.
Best For
Tailoring units and garment factories running Siruba 747K overlock seams, where a worn E229 plate causes skipped stitches or fabric snagging.
Why Replace This Plate
- Restores correct needle alignment for clean, skip-free overlock stitches
- Smooth surface prevents fabric snagging and thread fraying
- Matches the E229 hole pattern used on the 747K model
- Keeps stitch formation consistent when paired with a properly seated KM203 looper
Machine Compatibility
| Brand | Machine Type | Model |
|---|---|---|
| Siruba | Overlock | 747K (E229 needle plate) |
Specifications
| Part Number | E229 |
|---|---|
| Part Type | Needle Plate (Sui Plate) |
| Machine Model | Siruba 747K |
| Matching Looper | KM203 |
How to Replace the Needle Plate
Power off the machine and raise the presser foot. Remove the presser foot and cover plate, unscrew the old plate, and fit the E229 plate with needle holes aligned squarely under the needle bar. Tighten evenly, rotate the handwheel by hand to confirm clearance, then reattach the presser foot and test-stitch on scrap fabric.
FAQs
What if stitches still skip after fitting this plate? Check the KM203 looper for wear or incorrect timing, since looper condition affects stitch formation as much as the plate.
Should I check the feed dog too? Yes — if fabric feeds unevenly, inspect the feed dog for worn teeth.
Does this fit other Siruba 700-series machines? It is made for the 747K; compare your machine’s existing plate against the E229 part number before ordering.
