Industrial Steam Iron for Garment Finishing
An industrial steam iron is built for continuous pressing, not occasional home use. It holds heat under load, delivers steady steam for hours, and its parts can be replaced instead of binning the whole unit. StitchPartner stocks gravity-feed bottle irons, boiler-fed irons and full vacuum table systems for tailors, boutiques, laundries and garment units across India, with COD and pan-India delivery.
Types of Industrial Steam Iron We Sell
Gravity-Feed Bottle Steam Irons (300L, 96, 999, 6PC)
These commercial steam irons use gravity feed: water drops from an overhead bottle, so no separate boiler is needed, which is why they are the standard tailoring iron in Indian shops. The 300L, 96 and 999 are the common body designs. Browse the JACK 300L gravity-feed iron, the Messer 300L, the SILTI Pro 96, the Silver Star 300L and the Messer 999 full-hole.
Boiler Steam Irons and Steam Press Systems
A steam iron with boiler feeds steam from a separate pressurised tank, so you can press for hours without refilling the bottle. It suits garment factories, laundries and heavy daily pressing. See the 1600W iron with 4L boiler, the PB4000 4L boiler, the 8L boiler iron, the automatic steam boiler iron system and the automatic boiler system with 2 irons.
Vacuum Pressing Tables
A vacuum ironing table pulls steam down through the fabric and holds the garment flat while you press, which is what gives a finished shop-pressed look. Our boiler table with vacuum suction pairs with a boiler iron for faster finishing.
Industrial Steam Iron Price List in India (2026)
Gravity-feed tailoring irons start at ₹2,999 and boiler systems run from ₹14,999 to ₹45,000. These are our live selling prices, not indicative quotes.
| Type | Example models | Price range | Best for |
|---|---|---|---|
| Gravity-feed bottle iron | BS-6PC, Silti 96, Messer 300L, JACK 300L, Messer 999 | ₹2,999 – ₹3,999 | Tailor shop, boutique, small laundry |
| Boiler iron (2128 type) | Akari 2128 boiler iron | ₹3,299 | Shops already running a steam line |
| Iron with own boiler | PB4000 4L, 1600W 4L, 8L boiler iron, automatic steam boiler iron system | ₹14,999 – ₹20,990 | Full-day pressing, laundry, dry cleaner |
| Boiler + vacuum ironing table system | Vacuum suction table, automatic 2-iron system | ₹25,000 – ₹45,000 | Garment factory, finishing unit |
| Spare parts | Coil element, thermostat, steam switch, pipe, tap | ₹100 – ₹690 | Repairing an existing iron |
Specifications Compared
| Feature | Gravity-feed bottle iron | Boiler steam iron |
|---|---|---|
| Water source | Overhead bottle, usually 4L | Separate pressurised boiler, 4L to 10L |
| Typical wattage | 1600W – 1850W | 1600W iron plus boiler element |
| Steam | Gravity-fed, intermittent | Pressurised, continuous |
| Refilling | Bottle refilled through the shift | Boiler filled once, runs for hours |
| Space needed | Iron plus wall bracket | Floor space for the boiler unit |
| Running cost | Lower | Higher, but faster per garment |
How to Choose the Right Industrial Steam Iron
For a small tailoring shop or boutique, a gravity-feed 300L, 96 or 999 iron is usually enough. For long daily pressing in a factory or laundry, a boiler iron saves the refilling time that otherwise eats into every shift. Check the wattage on the product page, since our listings range from about 1600W to 1850W. A full-hole soleplate spreads steam more evenly across the fabric than a front-hole plate, which matters most on thick cotton and suiting. If you already own a working boiler, buy only the iron rather than a whole system.
Steam Iron Spare Parts
When an industrial iron stops heating, the failed part is usually cheap to replace. We stock steam iron spares including element coils, steam switches, thermostats, fuses, pipes and valves. See the 300L element coil, the 96 element coil, the 999 element coil, the 2128 thermostat and the 300L steam switch. For boiler tables and valves, see vacuum table and boiler parts.
Frequently Asked Questions
What is the price of an industrial steam iron in India?
A gravity-feed tailoring iron costs ₹2,999 to ₹3,999 and a complete boiler system costs ₹14,999 to ₹45,000. The wide gap is because a bottle iron is a single appliance while a boiler system includes a pressurised tank, pump and controls. Spare parts for either start around ₹100, so repairing an older iron is almost always cheaper than replacing it.
What is the difference between an industrial steam iron and a home iron?
An industrial iron is designed to stay switched on through a full working shift. It carries a continuous water feed, a heavier soleplate that holds temperature when pressing thick fabric, and serviceable parts. A home iron holds a few hundred millilitres of water internally and is not built for back-to-back pressing, which is why its element fails early in shop use.
Which steam iron is best for a tailoring shop?
A gravity-feed 300L, 96 or 999 bottle iron is the usual choice. It needs no boiler, heats quickly and is easy to repair locally. Pick a boiler iron only if you press continuously all day or run a laundry, where the time lost refilling a bottle outweighs the extra cost.
What is the difference between a 300L, 96 and 999 steam iron?
They are model numbers for common bottle-iron body designs rather than brands. Their spare parts are not interchangeable, so match the model number stamped on your iron before ordering a coil, switch or thermostat. Several brands sell the same underlying body, which is why a Messer and a Silver Star 300L look alike.
Will an 1800W industrial iron overload my shop socket?
A single 1600W to 1850W iron runs safely on a standard Indian 16A socket. The problem comes from running several irons, or an iron and a boiler, on one circuit. A boiler system draws considerably more, so have an electrician confirm the circuit rating before installing one.
Why has my steam iron stopped heating?
A burnt element coil is the most common cause. A blown fuse, a failed thermostat or a faulty steam switch can also cut the heat. Test the coil first, since it is the cheapest part to swap. Replace the failed component rather than the whole iron.
Are spare parts available years after buying?
Yes. The 300L, 96, 999 and 2128 designs have been standard in India for years, so coils, thermostats, switches, pipes and taps remain stocked. This is a real advantage over an imported domestic iron, where a failed element usually means the unit is scrap.
Do you offer cash on delivery?
Yes, Cash on Delivery is available on eligible orders, with pan-India delivery and GST billing under our registered entity. Orders are dispatched from Nagpur, Maharashtra.StitchPartner has supplied industrial sewing and pressing equipment to tailors, boutiques, laundries and garment units across India. Every price on this page is our live selling price. Read more about how a clothes iron works. Page last updated: October 2026.