Replace a worn or damaged motor rotor with this 110mm cloth cutting machine armature, designed for compatible electric round and octagonal fabric cutting machines. It is suitable for selected Lejiang YJ-110 / YJ-110A and Taking TK-110 models, with compatibility also intended for compatible 110mm cutter configurations.

This motor armature helps restore the rotating drive system of your cloth cutting machine when the existing armature has developed performance issues. It is suitable for tailoring units, garment workshops, textile cutting operations and fabric processing applications where reliable multi-layer cutting is required.

The 110mm size is commonly used across portable electric round-knife fabric cutters. However, the armature itself must match the machine’s internal motor and shaft configuration. Please verify the shape, shaft dimensions, gear arrangement and existing armature before purchasing.

What Is a Cloth Cutting Machine Armature?

A motor armature, also called a rotor, is the rotating component inside an electric motor. It works with the motor’s electrical and magnetic components to produce the rotational movement required to drive the cutting mechanism.

When an armature becomes worn or damaged, the machine may experience reduced cutting performance, abnormal vibration, electrical arcing, unusual noise or difficulty maintaining normal motor operation. Replacing the armature can be a practical repair option when the remaining motor components are serviceable.

Key Features

• Designed for compatible 110mm electric cloth cutting machines
• Suitable for selected Lejiang, Taking and compatible machine configurations
• Replacement motor armature / rotor for fabric cutting equipment
• Suitable for round and octagonal blade cutter applications where the armature specification matches
• Intended for textile and garment fabric cutting work
• Pack contains 1 piece
• Suitable replacement option for repair and machine maintenance

Machine Compatibility

The Lejiang YJ-110 is a 110mm round-knife cloth cutting machine, while Taking TK-110 is also identified as a 110mm round cloth cutting machine. Market listings also identify Messer MS-110 as a 110mm round-knife cutter.

Important: 110mm blade size alone does not guarantee armature compatibility. Please verify the shape and measurements of your existing part before purchasing.

Best Fabric Types

This armature is intended for compatible cloth cutting machines used for a wide range of textile materials, including:

• Cotton fabric
• Denim
• Polyester
• Wool
• Canvas
• Silk
• Synthetic fabrics
• Leather
• Carpet and textile materials
• Multi-layer fabric stacks

The actual cutting performance depends on the machine, blade condition, motor condition and fabric thickness.

Who Can Use It?

This replacement armature can be useful for:

• Tailors
• Garment manufacturers
• Boutique owners
• Textile workshops
• Fabric cutting operators
• Upholstery and leather workers
• Sewing machine and garment machinery repair technicians

It is particularly useful when repairing an existing 110mm electric cloth cutting machine is more practical than replacing the complete machine.

How To Replace the Armature

1. Disconnect the machine from the power supply.
2. Remove the appropriate motor housing and components according to the machine design.
3. Remove the existing armature carefully.
4. Compare the replacement armature with the original part, including shaft, gear and overall configuration.
5. Install the new armature in the correct position.
6. Reassemble the motor housing and related components.
7. Rotate the mechanism manually to check for obstruction.
8. Test the machine at low operating load before returning to normal cutting work.

Electrical and motor repairs should be carried out by a qualified technician when you are not familiar with the machine’s internal components.

Why Replace the Armature Instead of the Complete Machine?

A damaged armature does not necessarily mean the complete cloth cutting machine needs replacement. If the motor housing, gears, bearings and other components remain serviceable, replacing the faulty rotor can restore the machine’s operating system at a lower repair cost.

Before ordering, compare your old armature carefully. Small differences in shaft length, gear position, commutator arrangement or overall dimensions can prevent correct installation.

Frequently Asked Questions

Is this armature compatible with Lejiang YJ-110?

Yes. This armature is intended for the Lejiang YJ-110 and YJ-110A 110mm cloth cutting machines based on the supplied compatibility information. Before ordering, compare the existing armature’s shape, shaft and gear arrangement because variations can exist between machines.

Does this armature fit Taking TK-110?

Yes, it is specified for the Taking TK-110 110mm cloth cutting machine. Taking TK-110 armatures are also listed separately in the current replacement-parts market, confirming that the model is commonly serviced with a dedicated armature component.

Can I use this armature in any 110mm cloth cutting machine?

Not necessarily. A 110mm blade diameter does not by itself confirm motor-armature compatibility. The armature must also match the motor housing, shaft, gear arrangement and internal dimensions. Please verify the shape and measurements of your existing part before purchasing.

Is this suitable for multi-layer fabric cutting?

Yes, when installed in a compatible 110mm cloth cutting machine. The machine and blade combination can be used for multi-layer textile cutting, but the actual cutting capacity depends on fabric type, stack thickness, blade sharpness and machine condition.

Can this armature be used for leather and denim cutting?

Yes, it can be used in compatible cloth cutting machines used for denim, leather, canvas and other textile materials. The armature itself provides motor rotation; cutting suitability also depends on the machine’s blade and overall condition.

What does an armature do in a cloth cutting machine?

The armature is the rotating part of the electric motor. It works with the motor’s magnetic field and electrical components to produce rotational movement, which is transferred to the cutting mechanism.

What should I check before buying a replacement armature?

Check the machine model, armature shape, shaft dimensions, gear position, commutator arrangement and other visible details against your existing part. If specifications are unclear, please verify the shape and measurements of your existing part before purchasing.