B1524-522-NAA (1/8) Presser Foot for Juki Edge Trimming Machine | Clean Edge Stitching
Original price was: ₹149.00.₹100.00Current price is: ₹100.00.
Description
The B1524-522-NAA (1/8) Presser Foot is designed for industrial edge trimming sewing machines that combine stitching and fabric trimming in one operation. This presser foot helps you maintain a precise seam allowance while allowing the integrated side cutter knife to trim excess raw fabric edges neatly.
This foot is commonly used in garment manufacturing, tailoring shops, and boutique production setups where clean edge finishing is important. It is especially useful for operations requiring narrow seam stitching with simultaneous trimming to improve speed and consistency.
Competitor analysis shows most sellers only mention the part number and compatibility, but they fail to explain actual usage, fabric suitability, and installation considerations. This page addresses those missing details.
Designed for Edge Trimming Precision
Unlike standard presser feet, the B1524-522-NAA is specifically engineered for machines equipped with a side cutter or edge trimmer mechanism. Its design allows fabric to feed smoothly while keeping the cutting path aligned with the machine’s trimming knife.
This helps in:
- Cleaner fabric edges
- Consistent seam allowance
- Reduced manual trimming work
- Faster production speed
In garment factories and apparel manufacturing units, this is especially valuable for high-volume stitching where efficiency matters.
For operations involving woven fabrics, uniforms, shirts, and light-to-medium weight garments, precise edge trimming improves finishing quality and reduces fabric fraying.
Machine Compatibility
This presser foot is compatible with Juki single-needle industrial lockstitch sewing machines equipped with edge trimming systems.
Common compatible models include:
- JUKI DLM-5200
- JUKI DLM-5200N
- JUKI DLM-5210N
- JUKI DLM-5400 series
- Similar edge trimmer equipped industrial machines
This presser foot is not suitable for regular lockstitch machines without edge trimming attachment.
Please verify your machine model and existing presser foot shape before purchasing.
Best Use Cases
The B1524-522-NAA (1/8) foot is suitable for:
- Narrow seam stitching
- Edge trimming during stitching
- Clean edge finishing
- Production stitching
- Uniform manufacturing
- Shirt and garment assembly
This makes it highly useful in:
- Tailoring shops
- Boutique production
- Garment manufacturing
- Textile industry
- Apparel manufacturing
Where speed and consistent finishing are critical, this foot helps reduce manual rework.
Fabric Compatibility
Recommended fabrics:
- Cotton
- Poly-cotton
- Uniform fabrics
- Shirting fabric
- Light denim
- Medium woven fabrics
Use caution with:
- Very thick multilayer fabrics
- Heavy leather
- Extremely stretchy fabrics
Performance can vary depending on machine setup, knife alignment, feed settings, and operator skill.
Key Benefits
Smooth Fabric Feeding
The foot helps guide fabric in a controlled path during stitching and trimming.
Cleaner Edges
The integrated trimming mechanism cuts raw edges during stitching for cleaner results.
Better Production Speed
Sewing and trimming happen in one step, reducing extra finishing work.
Consistent Seam Width
The 1/8 configuration helps maintain narrow and uniform seams.
This is particularly helpful in production lines where seam consistency affects garment quality.
Why This Presser Foot Matters in Production
In many tailoring and garment manufacturing setups, manual trimming after stitching wastes time and creates inconsistency.
An edge trimming setup with the correct presser foot solves this by combining:
- Stitching
- Guiding
- Trimming
into one efficient workflow.
That means operators can work faster while achieving cleaner output.
For shops handling repeated production orders, this small spare part can improve workflow efficiency significantly.
Installation Note
Always install the presser foot with the machine switched off.
Before use:
- Check presser foot alignment
- Check knife clearance
- Verify needle movement
- Test on scrap fabric
Improper installation may cause:
- Needle strikes
- Uneven trimming
- Poor stitch quality
Please verify the shape and measurements of your existing presser foot before purchasing.
3) MACHINE COMPATIBILITY TABLE
| Machine Type | Compatible |
|---|---|
| Juki DLM-5200 | Yes |
| Juki DLM-5200N | Yes |
| Juki DLM-5210N | Yes |
| Juki DLM-5400 Series | Yes |
| Standard Single Needle Lock Stitch Machine | No (without edge trimmer) |
| TA1 Umbrella Sewing Machine | No |
4) HOW TO USE
- Turn off the sewing machine.
- Remove the existing presser foot.
- Install B1524-522-NAA foot correctly.
- Check alignment with edge trimming knife.
- Test stitch on sample fabric.
- Adjust seam width if required.
5) FAQs
Is this presser foot suitable for normal lockstitch machines?
No. It is designed for edge trimming machines only.
Which machines support this foot?
Mainly Juki DLM series machines equipped with edge trimmers.
Can it trim fabric while sewing?
Yes. It is designed for simultaneous stitching and edge trimming.
Is this suitable for heavy fabrics?
Best for light to medium fabrics. Heavy fabric performance depends on machine settings.
Why is seam width important?
The 1/8 width helps achieve narrow and consistent seam finishing.
