E3826 Needle Plate Siruba Sewing Machine

The E3826 needle plate is a throat plate built for Siruba sewing machines using this part number. It sits beneath the presser foot, supplying the needle clearance holes, and works with the machine’s feed dog to move fabric evenly under the needle.

Best For

Tailoring units and repair workshops servicing Siruba machines fitted with the E3826 plate, where wear at the plate edge is causing skipped stitches or fabric snagging.

Why Replace This Plate

• Restores correct needle alignment for accurate, consistent stitching
• Smooth ground surface prevents fabric snagging and thread fraying
• Matches the E3826 hole pattern used on compatible Siruba machines
• Keeps fabric feed consistent when paired with a properly maintained feed dog

Machine Compatibility

Specifications

How to Replace the Needle Plate

Switch off the machine and raise the presser foot. Remove the presser foot and cover, unscrew the old plate, and fit the E3826 plate with needle holes aligned squarely under the needle bar. Tighten evenly, turn the handwheel by hand to confirm clearance, then reattach the presser foot and test on scrap fabric.

FAQs

Should I check the feed dog too? If fabric still feeds unevenly after this plate change, inspect the feed dog for worn teeth.

What if stitches still skip? Check the loopers for wear and confirm correct needle height.

How do I confirm this fits my machine? Match the part number stamped on your existing plate against E3826 before ordering.