Jack A2 Pedal Accelerator 10130044 Speed Panel

he Jack A2 Pedal Accelerator 10130044 Speed Panel is an electronic foot pedal control assembly designed to regulate sewing speed on compatible Jack direct-drive single-needle lockstitch machines. It converts foot pressure into controlled speed input, helping you start slowly, adjust stitching speed, and maintain better control during sewing.

This pedal accelerator is identified with Part No. 10130044 and is associated with Jack A2-series machines, including A2-CZ and A2-CHZ configurations. The supplied reference also identifies the assembly as a 6-pin pedal accelerator/speed panel.

If your original pedal has become unresponsive, inconsistent, damaged, or difficult to control, replacing the complete pedal accelerator can help restore normal speed-control operation.

Why Choose This Jack Pedal Accelerator?

Precise foot control matters when you sew curves, corners, short seams, or detailed garment sections. A responsive accelerator lets you control the machine more naturally instead of running at one fixed speed.

The 10130044 pedal accelerator provides an electronic interface between your foot movement and the machine’s speed-control system. It is suitable for tailoring, garment production, alteration work, and other sewing applications using compatible Jack single-needle machines.

Key Features

• Part Number: 10130044
• Pedal Type: Electronic foot pedal accelerator / speed panel
• Connector: 6-pin and 4-pin configuration based on the supplied reference
• Machine Type: Direct-drive single-needle lockstitch
• Speed Control: Foot-operated electronic speed adjustment
• Application: Garment stitching and tailoring operations
• Installation: Designed as a replacement pedal assembly for compatible machines
• Pack Quantity: 1 Piece

Machine Compatibility

This pedal accelerator is intended for selected Jack single-needle direct-drive lockstitch machines.

Compatible Jack models supplied for this product include:

• Jack A2
• Jack A2-CZ
• Jack A2-CHZ
• Jack A2S
• Jack A3
• Jack A4B
• Jack A4F
• Jack A5
• Jack 6380
• Jack 781D
• Jack 781E
• Jack 9270D series

The reference product page specifically lists 10130044 with the Jack A2-CHZ-M pedal accelerator and identifies the assembly as a 6-pin version.

Important: Connector layout can vary between machine versions. Please compare the connector, pedal shape, and part number with your existing assembly before ordering.

Machine Compatibility Table

Best Fabric Types

The pedal accelerator does not directly determine fabric compatibility. Fabric suitability depends mainly on the sewing machine, needle, thread, presser foot, and machine settings.

When installed on a compatible Jack single-needle lockstitch machine, it can support normal garment sewing applications involving:

• Cotton fabric – suitable for shirts, uniforms, and general garment work.
• Polyester fabric – useful for synthetic garment production and everyday tailoring.
• Denim – suitable when the compatible machine is correctly configured for the fabric thickness.
• Medium-weight woven fabrics – suitable for general apparel stitching.
• Light and heavier garment materials – depending on the machine setup and sewing requirements.

How To Use

1. Switch off the sewing machine and disconnect the power before replacing the pedal.
2. Remove the existing pedal assembly according to the machine’s service procedure.
3. Compare the replacement connector with the original pedal connector.
4. Connect the 10130044 pedal accelerator securely to the compatible control system.
5. Position the pedal comfortably on the floor.
6. Switch on the machine and test the pedal at low speed.
7. Gradually press the pedal to confirm smooth speed response.
8. Check that the machine starts, accelerates, and stops correctly before beginning normal production.

Do not force a connector into the control box. If the plug configuration does not match your original assembly, verify the part number and connector before installation.

When Should You Replace The Pedal Accelerator?

Consider replacing the pedal when the machine shows inconsistent speed control, delayed response, intermittent acceleration, or a pedal that no longer responds correctly to foot pressure.

A damaged connector, worn pedal assembly, or internal electronic fault can also cause speed-control problems. Replacing the complete compatible accelerator assembly may provide a simpler repair than attempting to repair individual internal components.

Frequently Asked Questions

What is Jack pedal accelerator part number 10130044?

10130044 is an electronic pedal accelerator / speed panel assembly used with compatible Jack sewing machines. The supplied reference identifies it with the Jack A2-CHZ-M and A2-CZ/A2-CHZ pedal accelerator assembly. The reference version uses a 6-pin connector, so compare your existing connector before purchasing.

Is 10130044 compatible with Jack A2-CZ?

Yes. The 10130044 pedal accelerator is associated with the Jack A2-CZ / A2-CHZ direct-drive single-needle lockstitch machine range. Check the connector and existing pedal before ordering because machine versions can differ.

Is this Jack pedal accelerator 6-pin?

Yes, the referenced 10130044 assembly is identified as a 6-pin pedal accelerator. The competitor listing describes the A2-CZ/A2-CHZ pedal as a 6-pin speed panel and separately identifies Part No. 10130044 with the A2-CHZ-M version.

Can I use this pedal on a Jack A4 machine?

It is listed for selected Jack A4 models, including A4B and A4F in the supplied compatibility information. Before buying, compare the part number, connector, and original pedal assembly with your machine to confirm the exact version.

Does the pedal control sewing speed?

Yes. The pedal accelerator provides the operator’s foot-controlled speed input, allowing the sewing machine to accelerate or slow down according to pedal pressure. This is useful when you need slower stitching for corners, detailed work, or precise garment seams.

Is this pedal suitable for a TA1 Umbrella Sewing Machine?

No compatibility is specified for TA1 Umbrella Sewing Machines. This product is designed around the listed Jack direct-drive single-needle machine models. Do not substitute it for a TA1 pedal unless the connector and machine manufacturer specifically confirm compatibility.

Can I install this pedal without custom wiring?

The assembly is intended as a replacement pedal for compatible Jack machines, but installation depends on matching the correct connector and machine version. Do not modify or splice the wiring simply to make an incompatible connector fit. Verify the original part before installation.

What should I check before buying?

Check the part number, machine model, connector type, and physical pedal assembly against your existing component. The referenced version of 10130044 uses a 6-pin connector. If your existing pedal has a different connector, please verify compatibility before purchasing.

PRODUCT SPECIFICATION

Please verify the shape and measurements of your existing part before purchasing.