The Pegasus 252675 block is a replacement mechanical block used in the feed mechanism of compatible Pegasus industrial sewing machines. Pegasus parts documentation identifies Part No. 252675 as a BLOCK and lists it in the feed mechanism of the W600-series documentation.

In addition, a current spare-parts listing specifically identifies 252675 as “Block for W664”, while Indian sewing-parts listings also sell the part as a 252675 block for Pegasus W664.

Therefore, this part is useful when servicing a compatible Pegasus cylinder-bed machine and replacing a worn or damaged block. However, machine parts can differ between gauges and model versions. So, always compare the original part number and physical shape before ordering.

Key Features

• Part Number: 252675
• Part Description: Block
• Primary documented application: Pegasus W664
• Machine type: Industrial cylinder-bed sewing machine
• Application: Feed mechanism / mechanical assembly
• Pack Quantity: 1 Piece
• Replacement application: Suitable for machine repair and maintenance where Part #252675 is specified

The Pegasus parts documentation places 252675 alongside the feed-bar and related feed-mechanism components, which makes correct part identification especially important during servicing.

Machine Compatibility

The strongest available evidence identifies 252675 as a block for the Pegasus W664. A Pegasus parts reference also lists Part No. 252675 as a block, while the W600 documentation shows it within the feed mechanism.

Documented / strongly supported

• Pegasus W664 ✓
• Pegasus W600-series application ✓ where Part #252675 is specified

Verify before purchasing

• Pegasus W664P
• Pegasus W500 Series
• Pegasus WT500 Series
• Jack cylinder-bed interlock machines
• Siruba cylinder-bed interlock machines
• Yamato cylinder-bed machines
• GEMSY cylinder-bed machines
• Zoje cylinder-bed machines
• Kansai Special machines

The similar mechanical design of different industrial sewing machines does not automatically mean that their internal blocks are interchangeable.

Please verify the shape and measurements of your existing part before purchasing.

What Is the 252675 Block Used For?

The 252675 block forms part of the machine’s mechanical feed system. Pegasus documentation places the component in the feed mechanism, alongside parts such as the feed bar, guides, pins, crankshaft and related blocks.

As a result, the correct replacement can matter for proper mechanical movement and feed-system operation.

You may need this part when:

• A machine block has worn during regular operation
• The original component has been damaged
• A machine is being rebuilt during servicing
• A technician is replacing a specified Pegasus spare part
• A feed mechanism requires replacement components

Moreover, matching the part number 252675 is safer than selecting a replacement based only on appearance.

Why Correct Part Identification Matters

Industrial sewing machine components often look similar. However, their dimensions, mounting positions and mechanical functions can differ.

For that reason, compare the replacement with your existing component before installation. Check the part number, shape, mounting position and dimensions where available.

If your machine uses a different gauge or configuration, the correct block may have a different part number.

Please verify the shape and measurements of your existing part before purchasing.

Related StitchPartner Products

You can explore industrial sewing machine spare parts for additional replacement components.

You can also browse sewing machine accessories for maintenance parts and sewing-machine accessories.

For additional identification, the available Pegasus parts documentation can help you cross-reference Part #252675 with the relevant machine assembly.

 MACHINE COMPATIBILITY TABLE

 HOW TO USE

1. Switch off the sewing machine and disconnect the power supply.
2. Identify the existing block in the relevant machine assembly.
3. Remove the surrounding components according to the machine service procedure.
4. Compare the old component with Part #252675.
5. Check its shape, mounting position and dimensions.
6. Clean the mating surfaces before installation.
7. Install the replacement block in the same position as the original.
8. Refit the related feed-mechanism components.
9. Turn the machine by hand first and check for smooth mechanical movement.
10. Finally, run the machine at low speed and check the feed operation before returning to normal production.

Installation should follow the appropriate machine service manual or be carried out by a qualified sewing-machine technician.

 FREQUENTLY ASKED QUESTIONS

What is Pegasus 252675 block?

Pegasus 252675 is a machine block used in the mechanical feed system. Pegasus parts documentation lists Part No. 252675 as a BLOCK, while another Pegasus parts reference identifies it specifically as a Block for W664.

Is 252675 compatible with Pegasus W664?

Yes. Available parts references specifically identify 252675 as a block for the Pegasus W664.

Where is the 252675 block used?

Pegasus documentation places 252675 in the feed mechanism, together with other feed-related components.

Does 252675 fit the Pegasus W664P?

The supplied information associates the part with the W664, but I could not independently confirm W664P compatibility. Therefore, compare the existing part and machine parts list before ordering.

Can I use this block on a Jack or Siruba machine?

Do not assume compatibility based on machine design alone. Jack and Siruba compatibility has not been independently confirmed for Part #252675.

How many pieces are included?

This listing contains 1 piece of the 252675 replacement block.

Should I compare my existing part before ordering?

Yes. Compare the part number, shape, dimensions and mounting position. If these details do not match, please verify the correct machine part before purchasing.