The Pegasus 275029A0 thread guide is a replacement thread-control component used in compatible Pegasus industrial overlock sewing machines. Pegasus parts documentation identifies 275029A0 as a THREAD GUIDE and places it within the Thread Guide & Thread Takeup assembly of the EX3200/EX5200 series.

The part is particularly relevant when an original thread guide becomes damaged, worn, bent, or needs replacement during machine servicing. A current spare-parts listing also identifies 275029A0 as a 2-hole thread guide for Pegasus EX3200/EX5200 machines.

Because several Pegasus thread guides have similar part numbers, you should match the exact part number and physical shape before ordering.

Key Features

• Part Number: 275029A0
• Related Part Number: 275029
• Product Type: Thread Guide
• Documented Machine Family: Pegasus EX3200/EX5200
• Application: Thread guide and thread-control assembly
• Pack Quantity: 1 Piece
• Configuration: 2-hole version according to a current spare-parts listing
• Suitable for replacement and routine industrial sewing machine maintenance

Moreover, the Pegasus parts book lists both 2750290 and 275029A0 as separate thread-guide components in the same assembly. Therefore, do not assume that 275029 and 275029A0 are interchangeable without checking your machine’s parts diagram.

Machine Compatibility

The strongest available documentation supports the Pegasus EX3200/EX5200 family.

The official Pegasus parts documentation lists 275029A0 in the Thread Guide & Thread Takeup assembly. A current parts listing likewise identifies the component as a Thread Guide 2HOLE 275029AO for Pegasus EX3200/EX5200.

Confirmed / strongly supported

• Pegasus EX3200 Series ✓
• Pegasus EX5200 Series ✓
• Pegasus EX3200H variants ✓ where the parts book specifies 275029A0

Verify before purchasing

• Pegasus EX5100
• Pegasus M700 Series
• Pegasus MX Series
• Pegasus W600 Series
• Jack overlock machines
• Siruba overlock machines
• Yamato overlock machines
• Zoje overlock machines
• GEMSY overlock machines
• Typical overlock machines

Cross-brand machines can use similar thread-guide designs. However, similar appearance does not confirm interchangeability.

Please verify the shape and measurements of your existing thread guide before purchasing.

What Does a Thread Guide Do?

A thread guide controls the route of the sewing thread as it travels through the machine. It helps keep the thread on the intended path before it reaches other thread-control components.

Therefore, a correctly positioned thread guide can contribute to consistent thread movement during sewing. If the guide becomes bent, damaged, or worn, the thread path may change.

For that reason, replacing a damaged guide with the correct part number can help restore the intended thread-routing arrangement.

Why the 275029A0 Part Number Matters

Pegasus parts documentation shows several thread guides within the same assembly, including 2750240, 2750420, 2750220, 2750290, 275029A0, 2750520, 2750280 and 2750570.

As a result, choosing a thread guide simply because it looks similar can lead to an incorrect replacement.

Before ordering, compare:

• Part number
• Number of thread-guide holes
• Overall shape
• Mounting position
• Existing machine parts diagram

A current spare-parts listing specifically describes 275029A0 as a 2-hole thread guide, which provides an additional identification point.

Best Uses

The 275029A0 thread guide is intended for industrial sewing-machine maintenance. You may need it when:

• An existing thread guide is bent
• A thread guide is damaged during servicing
• The original guide is missing
• A machine is being rebuilt
• Thread-routing components require replacement
• A technician is restoring a Pegasus overlock machine

However, always confirm the machine model and exact part number before installation.

Related StitchPartner Products

You can explore industrial sewing machine spare parts for additional machine components.

You can also browse sewing machine accessories for related maintenance products.

For additional identification, the Pegasus EX3200/EX5200 parts documentation provides a useful reference for the thread-guide assembly.

 MACHINE COMPATIBILITY TABLE

 HOW TO USE

1. Switch off the sewing machine and disconnect the power supply.
2. Identify the existing thread guide in the machine’s thread path.
3. Compare the old component with Part #275029A0.
4. Check the number and position of the guide holes.
5. Check the mounting position against the machine parts diagram.
6. Remove the old guide carefully.
7. Install the replacement in the same orientation.
8. Secure it with the appropriate mounting hardware.
9. Route the thread through the guide exactly as specified by the machine manual.
10. Turn the machine by hand first and check that the thread moves smoothly.
11. Finally, run the machine at low speed and inspect the thread path before returning to normal production.

 FREQUENTLY ASKED QUESTIONS

What is Pegasus 275029A0?

Pegasus 275029A0 is a thread guide used in the thread-guide and thread-takeup assembly of compatible Pegasus machines. The EX3200/EX5200 parts book lists it specifically as a THREAD GUIDE.

Is 275029A0 compatible with Pegasus EX3200?

Yes. Pegasus parts documentation includes 275029A0 in the EX3200 thread-guide assembly, and current spare-parts listings identify it for EX3200/EX5200 machines.

Is 275029A0 the same as 275029?

They are related thread-guide part numbers, but Pegasus documentation lists 2750290 and 275029A0 as separate components. Therefore, do not automatically substitute one for the other.

How many holes does the 275029A0 thread guide have?

A current spare-parts listing identifies 275029A0 as a 2-hole thread guide for Pegasus EX3200/EX5200 machines.

Does this thread guide fit Pegasus M700 machines?

Compatibility with the M700 series has not been independently confirmed for this exact part number. Please compare your existing thread guide and machine parts diagram before ordering.

Can I use it on Jack or Siruba machines?

Do not assume compatibility based only on the machine’s appearance or similar thread-guide design. Jack and Siruba compatibility has not been independently confirmed for 275029A0.

How many pieces are included?

This listing contains 1 piece of the 275029A0 thread guide.

What should I check before buying?

Check the part number, number of holes, shape, mounting position and machine model. If anything differs from your existing component, please verify the shape and measurements before purchasing.