1/4 Left Guide Presser Foot for Double Needle

The 1/4 left guide presser foot is designed for double-needle lock-stitch sewing machines that use a 1/4″ needle gauge. Its left-side guide helps you maintain a consistent distance from the fabric edge, making it useful for neat parallel stitching, seam margins and professional topstitching.

The S570/S570L style is specifically listed as a left-guide presser foot for double-needle machines, with a 1/4″ (6.4 mm) needle gauge. Therefore, it can be a practical choice when you need repeatable edge positioning during garment production.

Key Features

• 1/4″ Left Guide: Helps maintain a consistent stitching margin along the fabric edge.
• Double-Needle Application: Designed for compatible twin-needle lock-stitch machines.
• 6.4 mm Gauge: Suitable for machines configured for a 1/4″ needle spacing.
• Guided Sewing: The left guide helps you keep the fabric aligned while sewing.
• Pack Quantity: 1 complete presser foot set.
• S570/S570L Style: Commonly identified as a left-guide foot for double-needle industrial machines.

Machine Compatibility

This presser foot is intended for compatible double-needle lock-stitch machines with the appropriate presser-foot mounting arrangement and 1/4″ needle gauge.

A related 1/4″ double-needle presser-foot reference lists models from Juki, Brother, Singer, and Zoje, including Juki LH-1152, LH-3128, Brother T-8420B and T-8720B, Singer 112G and 212G, and Zoje ZJ845.

The competitor listing also associates the corresponding 1/4″ left-guide foot with several Juki and Brother double-needle machines.

For Jack, Siruba, SunStar, Typical, and other machine models, compatibility should be confirmed against your existing foot and machine specifications.

Please verify the shape and measurements of your existing presser foot before purchasing.

Best Uses

This left-guide presser foot is useful when you need consistent edge control during production. For example, you can use it for:

• Shirt and trouser topstitching
• Denim garment stitching
• Jeans and workwear
• Sportswear
• Canvas products
• Leather goods, where the machine and foot are suitable
• Parallel decorative stitching
• Consistent seam-margin sewing

Moreover, the side guide can make repeated stitching easier because you can follow the fabric edge instead of manually judging the distance for every seam.

Why Use a Left Guide?

A standard presser foot does not always provide a clear reference for maintaining an exact seam margin. However, a guided foot gives you a physical edge reference while you sew.

As a result, you can maintain a more consistent stitch line across repeated garment panels. This is especially useful for production work where several pieces need the same visual finish.

The 1/4″ guide configuration is particularly useful when your sewing operation requires a narrow, repeatable margin.

Installation and Compatibility Check

Before installing the foot, compare it with your existing presser foot. Check the mounting style, needle clearance, foot shape and needle gauge.

Also, confirm that the two needles pass through the foot opening correctly before operating the machine at production speed.

If your machine uses a different gauge or presser-foot configuration, this foot may not be suitable even if the machine brand appears on a similar compatibility list.

When in doubt, please verify the shape and measurements of your existing presser foot before purchasing.

Related StitchPartner Products

You can explore industrial sewing machine presser feet for other sewing applications.

You can also browse sewing machine accessories for additional machine parts and accessories.

For reference, S570L is also listed by other sewing-parts suppliers as a 1/4 × 1/32 left-guide foot for double-needle machines, reinforcing the S570L designation and application.

 MACHINE COMPATIBILITY TABLE

 HOW TO USE

1. Switch off the sewing machine and disconnect the power.
2. Remove the existing presser foot.
3. Position the 1/4″ left-guide foot correctly on the presser-foot holder.
4. Tighten the mounting screw securely.
5. Turn the handwheel slowly and check needle-to-foot clearance.
6. Place your fabric under the foot.
7. Position the fabric edge against the left guide.
8. Lower the presser foot and begin sewing slowly.
9. Keep the fabric edge against the guide while maintaining gentle fabric control.
10. Once alignment is confirmed, increase sewing speed gradually.

 FREQUENTLY ASKED QUESTIONS

What is a 1/4″ left guide presser foot?

A 1/4″ left guide presser foot is a double-needle machine foot with a left-side guide that helps maintain a consistent stitching margin. It is designed for compatible machines using a 1/4″ needle gauge.

What does S570L mean?

S570L identifies a left-guide version of the S570-style double-needle presser foot. Parts references list the S570L as a 1/4″ left-guide foot for double-needle machines.

What is the needle gauge?

This version is designed for a 1/4″ (6.4 mm) needle gauge. Check your machine’s actual needle spacing before ordering.

Can I use this foot on a single-needle machine?

No. This product is intended for compatible double-needle lock-stitch machines. A single-needle machine may require a different presser-foot design.

Is this foot suitable for Juki machines?

A related 1/4″ double-needle presser-foot reference lists several Juki LH models, including LH-1152 and LH-3128. Still, compare your existing foot before purchase.

Can this foot be used for denim?

Yes, it can be useful for denim and other woven apparel fabrics when the machine, needle, thread and presser-foot setup are appropriate for the material.

What is included?

The listing contains 1 set of the 1/4″ left-guide double-needle presser foot assembly