Best Cloth Cutting Scissors in India (2026 Price Guide)
Compare Jack, Jupiter, Usha, Pin and YDL cloth cutting scissors with real India prices, sizes, and COD delivery — plus how to pick the right one for your fabric.
- 13 min read
- Tips

Quick answer: For daily tailoring on cotton and light fabric, the USHA stainless-steel 9.5 inch pair (₹180) is a practical choice. For denim, canvas and multi-layer cutting, the PIN-7300 12 inch heavy-duty pair (₹1,299) is built for repeated use. For high-volume floors, the PIN 696A cordless electric scissor reduces hand fatigue.
Best pick by use case
- Home sewing and light cotton: Jack Domestic Scissor (₹150) for the lowest cost, or USHA 9.5 inch (₹180) for stainless steel
- Boutique and professional tailoring: YDL Professional Scissors, 10 to 12 inch (₹550–₹650)
- Denim and multi-layer cutting: PIN-7300 12 inch (₹1,299), or Golden Eagle 12 inch (₹1,200) for high-carbon steel
- High-volume cutting without hand fatigue: PIN 696A cordless electric (₹2,999)
- Seam finishing and fray control: Zig Zag pinking shears (₹450)
Still deciding? Compare manual vs battery electric scissors for tailors, covering speed, precision and cost.
The best cloth cutting scissors depend on what you’re cutting: cotton and lawn need a light 8-inch blade, denim and multi-layer factory cutting need a heavy 10–12 inch forged blade, and boutique finishing work needs a sharper, lighter pair. Below is a comparison of cloth cutting scissors that are in stock at StitchPartner now, with listed prices, sizes and COD availability, so you can match the scissor to the job instead of guessing.
Written by Aashu, owner of Stitch Partner, a tailoring-parts shop in Nagpur serving tailors and factories since 1989.
Cloth cutting scissors (कपड़ा काटने की कैंची) are called kainchi (also written kaichi) in Hindi, and many tailors also ask for a “sizer” when they want a cutting pair. All three names mean the same tool, so this guide covers them together.

Quick Comparison: Cloth Cutting Scissors Price in India (2026)
These are StitchPartner’s current prices and stock status, checked on 14 October 2026, from our cloth cutting scissors catalog.
| Brand / Model | Size | Best For | Price | Stock |
|---|---|---|---|---|
| Jack Domestic Scissor | See product page | Everyday cotton, light fabric, budget buyers | ₹150 | In stock |
| USHA Stainless-Steel (Golden Handle) | 9.5″ | Home tailors, boutique daily use | ₹180 (was ₹349) | In stock |
| YDL Professional Scissors | 10″–12″ | Heavier professional tailoring | ₹550–₹650 | In stock |
| Golden Eagle Cloth Cutting Scissors | 12″ | High-carbon steel, garment cutting rooms | ₹1,200 (was ₹2,000) | In stock |
| PIN-7300 Professional (12″) | 12″ | Heavy-duty industrial, daily factory use | ₹1,299 (was ₹1,999) | In stock |
| Zig Zag / Pinking Shears | See product page | Fraying-resistant edges, seam finishing | ₹450 | In stock |
| PIN Electric Scissors 696A (Cordless) | Electric | High-volume, multi-layer cutting without hand fatigue | ₹2,999 (was ₹3,500) | In stock |
| Cordless Electric Fabric Scissors | Electric | Rigid materials; test cloth on a scrap first | ₹1,299 (was ₹2,499) | In stock |
Types of Cloth Cutting Scissors — And When to Use Each

- Standard forged-steel tailor scissors (8″–10″): the default for home tailors and boutiques cutting cotton, lawn, and light synthetics. Jack and Usha cover this range.
- Heavy-duty / industrial scissors (10″–12″): forged, thicker blades built for multi-layer cutting in garment factories and bag-closer/stitching units — YDL Professional, Golden Eagle and PIN-7300 fall here.
- Pinking / zig-zag shears: cut a serrated edge that resists fraying on woven fabric — used for seam finishing, not for cutting a full garment pattern. See Zig Zag Pinking Shears.
- Electric / cordless fabric scissors: motorised cutting for high daily volume (multiple layers, thick denim, leather-like synthetics) — reduces hand fatigue over an 8-hour cutting shift. PIN 696A and the Cordless Electric Fabric Scissors are our stocked options.
How to Choose: Match the Scissor to the Fabric and the User
Fabric weight first. Light cottons and voiles cut cleanly with an 8-inch blade; denim, canvas, and multi-layer stacks need a longer, thicker forged blade (10″–12″) or the extra leverage of an electric scissor — a light blade forced through heavy fabric dulls fast and leaves a ragged edge.
Daily volume next. A home tailor cutting a few metres a day doesn’t need what a garment factory running multi-layer stacks all shift needs. For factory-level daily cutting, the ₹550–₹1,299 heavy-duty range (YDL, Golden Eagle, PIN-7300) holds an edge longer than a ₹150–₹180 light-duty pair, and an electric scissor removes hand strain entirely on high-volume floors.
Handle and blade coating matter for longevity. A bright chrome/nickel finish looks sharper out of the box but shows rust faster in humid conditions; a blued or matte-forged finish resists corrosion better over years of use — worth checking before buying if you’re near a coastal or high-humidity area.
Jack vs Usha vs YDL vs PIN: Which Should You Buy?
| Brand | Price band | Strength | Best fit |
|---|---|---|---|
| Jack | Budget (₹150) | Cheapest entry point, decent edge for light fabric | Home tailors, occasional use |
| Usha | Budget-mid (₹180) | Stainless steel, holds edge better than Jack at a similar price | Daily home/boutique cutting |
| YDL | Mid (₹550–₹650) | Professional 10–12 inch range for finishing and tailoring | Boutique and professional tailoring |
| PIN-7300 | Heavy-duty (₹1,299) | 12-inch blade, laser-sharpened edge, adjustable pivot | Garment factories, daily heavy volume |

Other Cloth Cutting Scissors Brands You Will See Online
Searching online also turns up brands we do not stock, such as Butterfly, Gemsy, Flexon, Kangaro and Snavida. Butterfly, Gemsy and Flexon are older names that many tailors still know. We cannot vouch for any of them, so judge every pair on the same checks instead of the brand name or the star rating alone.
- Steel type: high-carbon steel holds a finer edge but chips if dropped, while stainless resists rust better but is less strong.
- Tension screw: an adjustable pivot lets you tighten loose blades instead of replacing the pair.
- Bent handle: the lower blade rests flat on the table, so long panels stay flat while you cut.
- Return policy: a pair that arrives dull or loose should be easy to send back.
For background on how the tool works, see the Wikipedia entry on scissors. Not sure which pair fits your fabric? Message us on WhatsApp at 7447449590 and we will suggest one from the cloth cutting scissors range.
Questions Tailors Ask Before Buying Cloth Cutting Scissors
Are brass-handle (Meerut-style) tailor scissors better?
Not automatically better, but different. Traditional Meerut-style shears have heavy brass handles and a weighted feel that many master tailors like for long, straight cuts on a table. Modern pairs use lighter rubber-grip handles that are easier on the hand through a full day. Judge a pair by blade steel, how smoothly the pivot moves and how well it keeps its edge, not by the handle material.
Can a right-handed pair be used by a left-handed tailor?
It cuts badly. The blades of a right-handed pair cross so that a right hand presses them together. In a left hand they push apart, so the cut tears and the line is hard to see. Left-handed tailors should buy a left-handed pair, or ask us on WhatsApp before ordering.
How many layers of cloth can tailor scissors cut?
It depends on blade length, sharpness and fabric. A sharp 10–12 inch pair handles a modest stack of cotton or lawn cleanly. Thick denim or a tall stack needs a heavier forged blade and a good edge. Ignore any “cuts 16 layers” claim without a test, because dull blades shift the layers and ruin the pattern. For a daily high-volume stack, use an electric fabric scissor instead.
Electric scissors or hand scissors: which is better for cutting cloth?
Hand scissors for control and curves, electric for speed. A hand pair is cheaper and lets you follow a pattern line precisely. An electric cutter saves your hand on long, repeated cuts through multi-layer cloth, but needs charging and blade care. Many workshops keep one of each.
How do you know a pair of tailor scissors is genuine?
Check the brand stamp on the blade, the pivot and the weight. A genuine pair has a clear brand mark, a screw that adjusts tension, and blades that close smoothly along their whole length. Very low prices, a loose pivot or blades that gap near the tip are warning signs. Buy from a dealer who offers a return policy, and ask for a bill.
Why do my scissors chew the cloth instead of cutting it?
Usually the blades are dull or the tension screw is loose. Tighten the screw until the blades close without wobble, then sharpen the edge. If you cut paper with the pair, it dulls quickly, so keep one pair for cloth only. Our section below explains how often to sharpen.
How to Keep Cloth Cutting Scissors Sharp Longer
- First, wipe the blades dry after every use — fabric fibres trap moisture against the steel and start rust at the pivot before it’s visible.
- Next, cut only fabric with your fabric scissors — one session on paper or cardboard dulls a fine edge faster than months of cloth cutting.
- Then, oil the pivot screw lightly every few weeks so the blades keep even tension instead of loosening and shearing unevenly.
- Finally, get the blades professionally sharpened rather than home-honed once they start crushing fabric instead of cutting it cleanly — a proper sharpening machine restores the original bevel angle that a hand stone usually can’t.
Frequently Asked Questions
A 10″–12″ heavy-duty forged pair — PIN-7300 or Golden Eagle — handles denim and multi-layer stacks better than an 8-inch light-duty pair, because the longer blade and thicker steel keep a clean line through dense weave without the fabric puckering ahead of the blade. For all-day factory-volume denim cutting, an electric scissor like the PIN 696A cuts the same stack in less time with far less hand fatigue.
In practice on the Indian market the terms overlap, but “tailor scissors” usually means the straight-handled 8″–12″ pair used for garment cutting, while “shears” often refers to the bent-handled style that lets the bottom blade lie flat on the table for a straighter cutting line on large fabric pieces. Both do the same core job; bent-handled shears are easier on the wrist for long cutting sessions.
8-inch is enough for light cottons, alterations, and home sewing. 9″–10″ suits most boutique and regular tailoring work. 11″–12″ heavy-duty scissors (PIN-7300, Golden Eagle) are worth the extra length only if you’re cutting denim, canvas, or multiple fabric layers stacked together — a longer blade on light fabric is just harder to control, not an upgrade.
Only if your daily cutting volume is high enough that hand fatigue is the actual bottleneck — a home tailor cutting a few pieces a day gets no real benefit from an electric scissor like the PIN 696A. For a boutique or small factory running multi-layer stacks for hours, the motorised blade cuts faster and leaves the hand and wrist far less strained by the end of a shift, which is where the extra ₹2,000+ over a manual pair earns itself back.
Occasionally, yes, but it’s not recommended as a habit — paper and card contain grit that dulls a fine fabric edge much faster than cloth does. For regular leather or synthetic-leather cutting, a dedicated heavy-duty or electric scissor (like PIN 696A) holds up better than a standard tailoring pair.
Genuine branded tailor scissors in India currently range from about ₹150 for a basic Jack domestic pair to ₹1,299 for a heavy-duty 12-inch PIN-7300, with cordless electric scissors from about ₹1,299 to ₹2,999. Unbranded plastic-handle scissors sell for as little as ₹15–₹60 online but don’t hold an edge and aren’t a real comparison for daily tailoring use.
Jack and Usha are the budget-to-mid entry points (₹150–₹180) for home tailors and light daily cutting. YDL (₹550–₹650) covers the 10–12 inch professional middle. PIN-7300 (₹1,299) is built for garment-factory daily volume, and PIN’s electric 696A is the option once hand fatigue — not blade sharpness — becomes the limiting factor.
For daily factory-volume cutting, every 2–3 months is typical before the blade starts crushing rather than slicing fabric; a home tailor cutting occasionally can usually go 6–12 months. A telltale sign it’s overdue: the scissor still closes fully but leaves a frayed or pushed edge instead of a clean line, even on light cotton.
Buy Cloth Cutting Scissors Online with COD, Pan-India
StitchPartner stocks genuine Jack, Usha, YDL, Golden Eagle and PIN cloth cutting scissors from ₹150, with cash-on-delivery and pan-India shipping. Browse the full cloth cutting scissors range →
Stainless Steel or Carbon Steel: Which Is Better?
Carbon steel blades take a finer edge and are easier to sharpen. Stainless steel resists rust, which makes it the safer choice in humid workshops or for occasional cutting. High-carbon forged blades, such as the Golden Eagle 12 inch, are chosen for edge retention in heavy daily use, but they need wiping dry after every session.
GST and HSN Code for Cloth Cutting Scissors
Tailor scissors are classified under HSN 8213 and attract 18% GST (CGST 9% plus SGST 9%, or IGST 18%). Registered buyers should use HSN 8213 on purchase and sales invoices. Confirm the code with your accountant before filing, because some listings show the 8-digit code 82130000.
New in Our Range: Golden Eagle and Cordless Electric Scissors
Golden Eagle Cloth Cutting Scissors 12 inch (₹1,200, was ₹2,000) are forged high-carbon steel with offset handles and an adjustable brass pivot, built for garment cutting rooms and multi-layer work. The Cordless Electric Fabric Scissors (₹1,299, was ₹2,499) use a tungsten steel cutter head designed for tougher, rigid materials; test a small piece before cutting cloth.
More Cloth Cutting Scissors In Stock
These sizes are available now with COD and pan-India delivery:
- Jupiter Professional Tailor Scissor: 9 inch ₹230, 10 inch ₹250, 11 inch ₹275, 12 inch ₹300
- YDL Red Tailor Scissors, 10, 11 and 12 inch boutique pair (₹450–₹550)
- PIN Cloth Cutting Scissors, 11 and 12 inch (₹549–₹649)
- Pily Cloth Cutting Scissors, 10, 11 and 12 inch (₹600–₹700)
- Shuaipu Cloth Cutting Scissors, 11 and 12 inch (₹900–₹1,000)
- Pluto Cloth Cutting Scissors, 10 inch (₹250–₹330 by size)
Scissor sharpener: the Professional Electric Scissors Sharpener (₹5,000, was ₹6,999) is in stock now. Message us on WhatsApp at 7447449590 to order one.
Scissor for Cloth Cutting: Quick Answers to Common Searches
Where can I buy a scissor for cloth cutting online in India?
StitchPartner ships cloth cutting scissors across India with cash on delivery. Browse the full cloth cutting scissors range, or message us on WhatsApp at 7447449590 and we will suggest a pair for your fabric.
Which are the best heavy-duty shears for thick fabric?
For denim, canvas and multi-layer stacks, choose a 12 inch forged pair such as the PIN-7300 (₹1,299) or the Golden Eagle 12 inch (₹1,200). For all-day thick-fabric cutting, an electric scissor reduces hand fatigue. Test any pair on a scrap piece first.
What is the price of large tailor scissors?
Large 12 inch tailor scissors in our range start at ₹300 for the Jupiter 12 inch and go up to ₹1,299 for the PIN-7300. The Shuaipu 11 and 12 inch pair is ₹900–₹1,000 and the Pily 10 to 12 inch range is ₹600–₹700.
Which cloth cutting scissors suit home use?
For home sewing and light cotton, the Jack Domestic Scissor (₹150) and the USHA stainless-steel 9.5 inch (₹180) are the low-cost starting points.
Do I need an electric scissor for cloth cutting?
Only if you cut for hours every day. Our PIN 696A (₹2,999) and cordless electric fabric scissors (₹1,299) suit high-volume cutting; hand scissors are better for curves and control.
In This Guide
Related Articles
Looking for the Right Sewing Part?
From machine parts and accessories to cutting tools and finishing essentials, find the products you need to keep your work moving.
Explore Our Products

