B1190-522-S00 Needle Plate for Juki DLM-522 Edge Trimmer
₹149.00
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Product Description
B1190-522-S00 Needle Plate for Juki Edge-Trimming Machines
The B1190-522-S00 needle plate is a 1/8-inch gauge plate designed for Juki DLM-series single-needle machines with a vertical edge-trimming system. It is listed as the 1/8-inch gauge plate for the Juki DLM-522 and is also identified for DLM-5200 applications.
This replacement needle plate is suitable for light to medium-weight fabrics used in garment production, including dress shirts, blouses, cuffs, collar lining, pocket flaps, knitted trims, and fine woven garments.
The plate provides the required clearance around the edge-trimming mechanism while supporting smooth fabric feeding and controlled stitching. Its B1190-522-S00 / B1190522S00 part-number identification makes it easier to match with an existing machine part.
What You Get
- 1 × B1190-522-S00 needle plate
- 1/8-inch gauge specification
- Designed for Juki DLM-series edge-trimming machines
- Suitable for light to medium fabrics
- Replacement part for worn or damaged gauge plates
The 1/8-inch specification is also documented as a standard DLM-522 gauge size, with B1190-522-S00 paired with the corresponding feed dog, presser foot and other gauge components.
Why Choose This Needle Plate?
A worn needle plate can affect fabric movement, needle clearance and the consistency of edge trimming. Replacing the damaged plate with the correct gauge specification helps restore the intended working relationship between the needle, feed dog, presser foot and trimming mechanism.
This part is particularly useful when the original plate has developed needle marks, burrs, surface wear or damage around the needle opening.
The smooth working surface also helps the fabric move consistently during sewing. This is useful when working with finer garment fabrics where snagging or unwanted fabric drag can affect the finished seam.
Key Features
1/8-inch Gauge Specification
B1190-522-S00 corresponds to the 1/8-inch gauge configuration for the DLM-522 system.
Edge-Trimmer Clearance
The plate is designed for machines using a vertical edge-trimming arrangement, allowing the trimming mechanism to operate alongside the needle plate.
Precision Mounting
The replacement is intended for the specified Juki machine configuration, helping maintain proper needle and feed alignment after installation.
Industrial Replacement Part
A practical replacement when the existing gauge plate is worn, scratched, burred or damaged.
Machine Compatibility
| Machine Type / Model | Compatible |
|---|---|
| Juki DLM-522 | Yes |
| Juki DLM-5200 | Yes |
| Juki DLM-5200N | Yes |
| Juki DLM-5210N | Yes |
| Juki DLM-5400-7 | Yes |
| Juki DLM-5400N-7 | Yes |
| Juki DDL-5550 converted with suitable edge-trimming system | Verify configuration |
| Jack JK-5558WB | Yes, as specified for this product |
The B1190-522-S00 is directly documented for DLM-522 and DLM-5200 applications, while the supplied compatibility listing also includes the Juki DLM-5200N, DLM-5210N, DLM-5400 series and Jack JK-5558WB.
Part Number: B1190-522-S00
Alternate search formats: B1190522S00, B1190-522-SOO
Best Fabric Types
This needle plate is best suited to light to medium-weight garment fabrics, such as:
- Cotton
- Polyester
- Fine woven fabrics
- Shirt fabrics
- Blouse fabrics
- Collar lining
- Cuff materials
- Pocket flap fabrics
- Knitted trims
For very heavy denim, canvas, leather or other thick materials, confirm that your specific DLM configuration and gauge setup are intended for that fabric before use.
Matching Gauge Components
For users replacing the complete working gauge setup, B1190-522-S00 is associated with other DLM-522 gauge components. Juki’s gauge table lists it with B1613-522-N00 feed dog and compatible presser-foot components for the 1/8-inch configuration.
A related parts listing also identifies B1190-522-S00 as the 1/8-inch needle plate within a gauge set for the DLM-5200.
How To Replace the Needle Plate
- Switch off the sewing machine and disconnect power.
- Raise the presser foot and needle to a safe position.
- Remove the existing needle plate using the appropriate screwdriver.
- Clean lint, thread pieces and debris from the mounting area.
- Position the B1190-522-S00 plate correctly on the machine bed.
- Tighten the mounting screws securely without over-tightening.
- Turn the handwheel slowly and check needle clearance.
- Check the feed dog and edge-trimming mechanism for smooth movement.
- Test sew on a scrap piece of the intended fabric before production.
If your existing plate has a different opening, gauge size or mounting arrangement, please verify the shape and measurements of your existing part before purchasing.
Frequently Asked Questions
Is B1190-522-S00 a 1/8-inch needle plate?
Yes. B1190-522-S00 is identified as the 1/8-inch gauge plate for the Juki DLM-522 system. Juki documentation lists it under the 1/8-inch standard gauge configuration, while other B1190-522 part numbers correspond to different gauge sizes.
Does B1190-522-S00 fit Juki DLM-5200?
Yes. The part is listed for the Juki DLM-5200, and a Juki DLM-5200 parts listing identifies B1190-522-S00 as its 1/8 S gauge plate.
Is this needle plate suitable for edge-trimming machines?
Yes. B1190-522-S00 is specifically associated with the Juki DLM edge-trimming system. The DLM-522 gauge documentation lists it as the gauge plate for the machine’s trimming setup.
What fabrics can I sew with this needle plate?
It is intended for light to medium garment fabrics such as cotton, polyester, fine woven materials, shirt fabrics, blouse fabrics, cuffs and collar-related materials. For unusually thick fabrics, verify your machine configuration before use.
What is the difference between B1190-522-S00 and B1190-522-U00?
The main difference is the gauge size. B1190-522-S00 is the 1/8-inch version, while B1190-522-U00 is listed as the 1/4-inch version for the DLM-522 gauge system.
Can I use this on a Juki DDL-5550?
It may be used on a DDL-5550 configuration that has been converted with a suitable edge-trimming system, as specified in the supplied compatibility information. Verify the existing gauge setup before ordering.
What should I check before buying this needle plate?
Check your machine model, edge-trimmer configuration, existing plate shape, mounting-hole arrangement and gauge size. If these do not match, please verify the shape and measurements of your existing part before purchasing.
MACHINE COMPATIBILITY TABLE
| Machine Type | Compatible |
|---|---|
| Single Needle Lock Stitch Machine | Yes — for the specified Juki/Jack edge-trimmer configurations |
| TA1 Umbrella Sewing Machine | No / Not specified |
Important: This is a specialized DLM/edge-trimmer gauge plate. It should not be presented as a general-purpose needle plate for every Single Needle Lock Stitch Machine.
BEST FABRIC TYPES
Best suited for:
Cotton, polyester, fine woven fabrics, dress-shirt fabrics, blouse fabrics, collar lining, cuffs, pocket flaps and knitted trims.
Use caution with:
Denim, canvas, leather and other thick materials unless your exact machine configuration is designed for them.
Compatible Products
B1190-522-U00 Needle Plate for Juki DLM Edge Trimmer
